- Open Access
Organ-on-a-chip: recent breakthroughs and future prospects
BioMedical Engineering OnLine volume 19, Article number: 9 (2020)
The organ-on-a-chip (OOAC) is in the list of top 10 emerging technologies and refers to a physiological organ biomimetic system built on a microfluidic chip. Through a combination of cell biology, engineering, and biomaterial technology, the microenvironment of the chip simulates that of the organ in terms of tissue interfaces and mechanical stimulation. This reflects the structural and functional characteristics of human tissue and can predict response to an array of stimuli including drug responses and environmental effects. OOAC has broad applications in precision medicine and biological defense strategies. Here, we introduce the concepts of OOAC and review its application to the construction of physiological models, drug development, and toxicology from the perspective of different organs. We further discuss existing challenges and provide future perspectives for its application.
Microfluidics is a science and technology that precisely manipulates and processes microscale fluids. It is commonly used to precisely control microfluidic (10−9 to 10−18 L) fluids using channels that range in size from tens to hundreds of microns and is known as a “lab-on-a-chip” [1,2,3,4]. The microchannel is small, but has a large surface area and high mass transfer, favoring its use in microfluidic technology applications including low regent usage, controllable volumes, fast mixing speeds, rapid responses, and precision control of physical and chemical properties [1, 5, 6]. Microfluidics integrate sample preparation, reactions, separation, detection, and basic operating units such as cell culture, sorting and cell lysis . For these reasons, interest in OOAC has intensified . OOAC combines a range of chemical, biological and material science disciplines  and was selected as one of the “Top Ten Emerging Technologies” in the World Economic Forum .
OOAC is a biomimetic system that can mimic the environment of a physiological organ, with the ability to regulate key parameters including concentration gradients , shear force , cell patterning , tissue-boundaries,  and tissue–organ interactions . The major goal of OOAC is to simulate the physiological environment of human organs .
Human physiology is the science of studying the functions of the human body and its organ systems. This is of great significance to our understanding of the dysfunction and pathogenesis of the body, and therefore closely aligns with the fields of medicine, drug development and toxicology . The most relevant and direct methods for studying human physiology are in vivo experiments that study human or model organisms. Bodily functions rely on the interaction and adaptation of many lower-level components such as tissues, cells, proteins and genes. It is therefore challenging to reveal the underlying mechanisms of physiological phenomena simply through in vivo studies . In addition, drug development and toxicology require the assessment of the physiological effects of thousands of compounds . Due to the limitations of low-throughput in vivo testing, biologists use in vitro cell culture. Cell culture refers to the growth and maintenance of cells in a controlled environment . For decades, traditional two-dimensional (2D) cell culture systems formed an important platform for life science research. Using 2D systems, the functions of various cells are studied by culturing cells or cell products. However, 2D systems fail to accurately simulate the physiological manifestations of living tissues/organs, intra-organ interactions and microenvironmental factors [21, 22] and often require verification in in vivo animal models. Due to species differences, animal experiments often fail to replicate human experiments , and due to both high costs and ethical issues, the use of animals as models for drug testing has come under scrutiny . In preclinical testing, an inadequate description of the human tissue environment may lead to inaccurate predictions of the combined effects of overall tissue function . OOAC was designed to overcome these shortcomings by providing more physiological model systems . OOAC was proposed as a future replacement technology for experimental animal models .
This review introduces recent advances from OOAC technology and discusses its future perspectives for cell biological assessments.
Organs-on-a-chip design concept and key components
Culture systems require the control of external and internal cell environments . OOAC combined with micromachining and cell biology can control external parameters and accurately simulate physiological environments . Dynamic mechanical stress, fluid shear and concentration gradients are required on the chip. Cell patterning should also be realized to fully reflect physiological processes.
Fluid shear force
Microfluidics enables the dynamic culture of cells through micro-pump perfusion, which facilitates the administration of nutrients and timely waste discharge. The dynamic environment in which cells are located is more comparable to in vivo conditions than static culture. In addition, fluid shear stress induces organ polarity . Importantly, OOAC exerts necessary physical pressure on the normal biological functions of endothelial cells  by activating cell surface molecules and associated signaling cascades. Similarly, the incorporation of fluid into the OOAC device permits biological assessments at the single organ level . The OOAC system summarizes flow through a simple “rocker” on a chip fluid motion, or through a more complex programmable “pulsatile” format, arranged in a single loop for organization-specific configurations .
At the microscale level, the fluid acts primarily as a laminar flow, resulting in a stable gradient of biochemical molecules, controlled both spatially and temporally. Various biochemical signals driven by concentration gradients exist in biological phenomena, including angiogenesis, invasion, and migration [33,34,35]. Microfluidics simulate complex physiological processes in the human body by altering flow velocity and channel geometry using microvalves and micro-pumps to achieve stable, three-dimensional (3D) biochemical concentration gradients.
Dynamic mechanical stress
Normal day-to-day organ pressure includes blood pressure, lung pressure, and bone pressure. These pressures play a major role in maintaining mechanically stressed tissues such as skeletal muscle, bone, cartilage and blood vessels [36,37,38]. Microfluidics enable the use of elastic porous membranes to create periodic mechanical stresses. This mechanical stimulation is considered a key determinant of differentiation during physiological processes [39, 40].
The organization of the human body requires a complex and ordered arrangement of multiple cells to form a functional whole body interactions. Microfluidics control cell patterning for the construction of in vitro physiological models with complex geometries. Surface modifications , templates , and 3D printing  contribute to cell patterning on the chip. The 3D printing method enables multi-scale cell patterning by permitting the formation of hydrogel scaffolds with complex channels. The advantage of 3D printing is to allow user-defined digital masks to provide versatility in cell patterns, critical for the in vitro reconstruction of the cellular microenvironment. Li et al.  developed methods to achieve rapid heterotypic cell patterning on glass chips using controlled topological manipulations. This method combines a polyvinyl acetate coating, carbon dioxide laser ablation, and continuous cell seeding techniques on a glass chip. This method enables controlled epithelial–mesenchymal interactions. In addition, mesenchymal cells with similar properties can also be patterned on glass chips. This method can be helpful for large-scale investigation and pharmaceutical testing of cutaneous epithelial–mesenchymal interaction and can also be applied to the patterning of other cells.
The OOAC involves four key components, including (1) microfluidics; (2) living cell tissues; (3) stimulation or drug delivery; and (4) sensing . The microfluidic component refers to the use of microfluidics to deliver target cells to a pre-designated location and includes a system of culture fluid input and waste liquid discharge during the culture process. Typically, this component is characterized by miniaturization, integration, and automation . The living cell tissue component refers to components that spatially align a particular cell type in the case of 2D or 3D systems. The 3D arrangements are typically created by the addition of biocompatible materials such as hydrogels. These materials can prevent mechanical damage and shape three-dimensional arrangements. . Although the 3D tissue structure more accurately simulates the in vivo situation compared to 2D models, due to the limitations of technology and cost and the assembly of extracellular matrix and the presetting and formation of vasculature, living cell in organ tissues are still mostly cultivated in 2D. For certain tissues, physical or chemical signals are required to simulate the physiological microenvironment, which promotes micro-tissue maturation and function. For example, electrical stimulation can help myocardial tissue maturation . Different signal stimuli can be derived from for drug screening approaches . The sensing component for detecting and compiling data can be an embedded sensing output component or a transparent chip based visual function evaluation system. Peel et al.  used automated systems to image multicellular OOACs, producing detailed cell phenotypes and statistical models for measurements. Kane et al.  developed a cell system to monitor cells in a 3D microfluidic setting. These assays featured time-lapse imaging microscopy to assess cellular electrical activity through quality control. A meaningful human-on-chip cell model cannot be described and accessed without microsensors-mediated reading of the metabolic state at characteristic points in the system.
Emerging OOAC technologies
The hepatic system is the major site of drug/toxin metabolism. The liver constitutes a series of complex hepatic lobules that confer multicellular functional communication . Maintaining the physiology of hepatocytes over an extended time period is challenging . Kane et al. designed the first liver based system that consisted of microfluidic pores in which 3T3-J2 fibroblasts and rat liver cells were co-cultured to mimic an airway interface (Fig. 1) . Rat hepatocytes cultured in the chip could continuously and stably synthesize albumin and undergo metabolism. Lee et al.  designed a chip that mirrored the interstitial structure of endothelial cells and cultured primary hepatocytes, with culture media perfused outside the gap. This permeable endothelial gap separated hepatocytes in cord-based structures permitting their separation from the external sinusoidal region, simultaneously maintaining efficient substance exchange. Ho et al.  used radial electric field gradients that were produced using electrophoresis to pattern cells onto circular polydimethylsiloxane (PDMS) chips. These novel techniques simulated the hepatic lobule structure. Hegde et al.  fabricated a 2-layer chip that separated the channels using a porous polyethylene terephthalate(PET) membrane and continuously perfused collagen and fibronectin-sanded rat primary hepatocytes into the lower channel through the upper chamber.
To improve the physiological models, 3D hepatocyte culture techniques have been used form microfluidic chips . Ma et al.  produced a biomimetic platform for the perfusion of hepatic spheroids in situ. Yum et al.  produced systems to study how hepatocytes affect other cell types. High-throughput assays were developed to assess liver cell drug toxicity. Riahi et al.  produced microfluidic electrochemical chip immunosensors to detect the biomarkers produced during hepatotoxicity. Chong et al.  produced assays to monitor drug skin sensitization through the assessment of metabolite production and the activation of antigen presenting cells (APCs). This system holds value as a drug screening platform to identify compounds that produce systemic skin reactions. Lu et al.  developed biomimetic liver tumors through integrating decellularized liver matrixes (DLM) with gelatin methacryloyl (GelMA) to mirror the 3D tumor microenvironment (TME). This system provides an improved disease model for a range of future anti-cancer pharmacological studies. Furthermore, a number of disease or injury states were tested. Kang et al.  used their system to analyze viral replication of the hepatitis B virus. Zhou et al.  developed a system for modeling alcohol injury. Further characterization of cultured cytoplasm in metabolomics, proteomics, genomics, and epigenomic analysis will help improve the functional outcome of these studies.
Gas exchange in the lungs is regulated by the alveoli which can be challenging to reproduce in vitro. Microfluidics can establish extracorporeal lung models and lung pathologies through accurate fluid flow, and sustained gaseous exchange. Current studies have focused on the regulation of airway mechanical pressure, the blood–blood barrier (BBB),  and the effects of shear force on pathophysiological processes. Huh et al. produced a lung-on-a-chip model (Fig. 2)  using soft lithography to divide the chip into regions separated by 10 μm PDMS membranes with an extracellular matrix (ECM). The upper PDMS regions had alveolar epithelial cells, whilst the lower regions contained human pulmonary microvascular endothelial cells, thus mimicking the alveolar–capillary barrier. The structures of the membranes were altered under a vacuum to simulate expansion/contraction of the alveoli during respiration. Inflammatory stimuli were introduced into the system through neutrophils that were passed to the fluid channels. This produced a pathological model of pulmonary edema through the introduction of interleukin-2 (IL-2) . This highlights the utility of the OOAC models to improve current in vivo assays.
In 2015, Stucki et al.  reported a lung chip that mimicked the lung parenchyma. The system included an alveolar barrier and 3D cyclic strain that mimicked respiration representing the first elastic membrane expansion model to simulate breathing. Blume et al.  produced 3D airway culture models that simulated pulmonary interstitial flow through the exchange of both fluid and media. This permitted more in-depth physiological studies of the epithelial barrier. This model utilizes a stent with a permeable filter as a single tissue culture chamber and combined multiple chambers for improved integration. In the lung-on-a-chip, whilst simulating lung gas–liquid interfaces and respiratory dilation through the microfluidic system, pressure can be applied to the alveoli and attached capillaries, providing a shear flow profile. This realistically simulates the lung environment. Humayun et al.  cultured airway epithelial and smooth muscle cells at different sides of a hydrogel membrane to assess their suitability as a physiological model. The system was combined with microenvironment cues and toxin exposure as a physiological model of chronic lung disease. Yang et al.  produced a poly(lactic-co-glycolic acid) (PLGA) electrospinning nanofiber membrane as a chip matrix for cell scaffolds. Given the ease of the system, it is applicable to lung tumor precision therapy and tissue engineering approaches was highlighted.
Lung tissue organ chips are useful as implantable respiratory assistance devices. Peng et al.  designed lung assist devices (LAD) to permit additional gas exchange in the placenta for preterm infants during respiratory failure. The concept of large-diameter channels was achieved in the umbilical arteries and veins, providing LAD with high extra-corporeal blood flow. This has added utility because clinical trials for umbilical vasodilation thresholds were unethical. This study was the first to systematically quantify umbilical vessel damage as the result of expansion by catheters. Dabaghi et al.  performed microfabrication for microfluidic blood oxygenators using double-sided gas delivery to improve gas exchange. Oxygen uptake increased to 343% in comparison to single-sided devices. Xu et al.  used a microfluidic chip platform to mimic the microenvironment of lung cancer with cancer cell lines and primary cancer cells and tested different chemotherapeutic drugs. Another recent study mimicked asthma in a “small airway-on-a-chip” model . With the models of human asthmatic and chronic obstructive pulmonary disease airways, therapeutics were tested and the chip model recapitulated in vivo responses to a similar therapy.
The kidney is responsible for the maintenance of osmotic pressure drug excretion. Kidney toxicity leads to an irreversible loss of renal filtration highlighting the need for drug screening systems. Filtration and reabsorption take place in the nephrons that consist of the glomerulus, renal capsule, and renal tubule. Microfluidics can simulate the fluid environment that support tubular cell growth, and provides porous membrane support for the maintenance of cell polarity .
Jang et al.  produced the first multi-layered microfluidic system (Fig. 3a) in which mouse kidney medullary collecting duct cells were used to simulate renal filtration. The device provided a biomimetic environment that enhanced polarity of the inner medullary collecting duct through promoting cytoskeletal reorganization and molecular transport in response to hormone stimulation. In 2013, the same microfluidic device was used to culture human primary renal epithelial cells . These were the first toxicity studies of primary kidney cells. This device enables direct visualization and quantitative analysis of diverse biological processes of the intact kidney tubule in ways that have not been possible in traditional cell culture or animal models, and it may also prove to be helpful for studying the basic molecular mechanisms of kidney function and disease.
The disadvantage of conventional cell culture systems is that cell differentiation into functional cells requires extended culture times and an external signal detection system. Musah et al.  described methods to induce pluripotent stem cell-derived podocytes to form human glomerular chips (Fig. 3b) in organ culture devices. These mimicked the structure and function of the glomerular capillary wall, which was not possible with previously employed methods. The chip was applicable for nephrotoxicity assessments, therapeutic development, regenerative medicine, and kidney development and disease. Sakolish et al.  produced a reusable microfluidic chip in human proximal tubules and glomeruli that permitted renal epithelial cells to grow under various conditions. Shear stress causes nephrotoxicity. Schutgens et al.  designed stable tubule culture systems that permitted extended expansion and human kidney tissue analysis. Based the system, a multi-purpose primary renal epithelial cell culture model was developed that enabled rapid and individualized molecular and cellular analysis, disease modeling, and drug screening. Tao et al.  presented a powerful strategy to generate human islet organoids from human induced pluripotent stem cells. This strategy was applicable to a range of applications for stem cell-based organic engineering and regenerative medicine.
Cardiovascular deaths are the leading cause of human mortality. The emergence of microfluidics has enabled in vitro bionic studies of cardiac tissue. The myocardium is a major component of the heart. The beating of cardiomyocytes (CMs) can be used to directly assess drug effects and is directly related to heart pumping . In 2012, Grosberg et al.  used PDMS to produce an elastic film with a surface texture and implanted neonatal rat CMs on the membrane to form a muscle membranes. As the CMs contract, the muscle film curled to one side. By measuring the degree of this curl it was possible to analyze the differences in the size of the cell contractile capacities on the PDMS film. The experimental system was suitable for both single muscle membrane measurements and high-throughput automated multi-plate assays. Subsequently, in 2013, Zhang et al.  utilized hydrogels to produce self-assembled myocardial sheets in a PDMS model. The CMs were derived from differentiated myocardium. Micro-organ tissue chips were produced from 3D printing technology that permitted the integration of myocardial and vascular systems . The model utilized vascular endothelial cells to form vascular networks and CMs were added to the vascular network gap. The organ chip produced a screening platform for CV-related drugs.
Zhang et al.  introduced the heart-on-a-chip device that used high-speed impedance detection to assess cardiac drug efficacy. The device records the contraction of CMs to reveal drug effects. The chip represented a preclinical assessment of drug cardiac efficacy. Marsano et al.  built a heart organ platform (Fig. 4) that mimicked the physiological and mechanical environment of CMs. Direct visualization and quantitative analysis was performed, which was not permitted in traditional cell culture or animal models. This platform represents an advance in the field and provides standard functional 3D heart models. This makes the device an innovative and low-cost screening platform to improve the predictive power of in vitro models. Schneider  designed convenient and efficient chips to generate heart tissue in a controlled environment based on human induced pluripotent stem cells. The viability and function of myocardial tissue was maintained for an extended time period and detailed spatiotemporal pulsation dynamics were optically detected. This platform can be used for a variety of biomedical applications. In addition, Tzatzalos et al.  reported that the hiPSC-CMs can represent an unlimited potential for healthy and disease-specific CMs to assess the efficacy of drugs for dilated cardiomyopathy. These advances in drug development have important implications for cardiovascular tissue because cardiotoxicity is often seen in drug trials and is one of the main reasons clinical trials are suspended or drugs are withdrawn from the market.
Oral drugs have to transverse the small intestine to enter the bloodstream. Villi are key to absorption and their morphology must be maintained on the chip . Imura et al.  developed chips to simulate the intestinal system, consisting of a glass slide permeable membrane and PDMS sheet containing the channels. Caco-2 cells were cultured on the chips. Sung et al. produced the first 3D hydrogel structure to simulate the human intestinal villi . Kim et al. produced bionic devices (Fig. 5) . The microenvironment of the intestine was reconstructed through shear force and cyclic strains. Caco-2 cells show prolonged growth and maintained the microbial flora in the human intestine. The complex structure and physiology of the intestine provided a platform for drug screening and the role of the intestinal microbiome, inflammatory cells and peristaltic-related mechanical deformation during intestinal disease . The device permitted the exploration of the etiology of intestinal disease and identified therapeutic targets and drugs. This study demonstrates the potential of intestine-on-chip for personalized medicine studies on intestinal cells.
Intestinal cells were cultured alone or with endothelial cells including HUVECs . Genome fidelity was low, so the chips mimicked intestinal function. Kasendra1 et al.  combined intestinal tissue engineering  and OOAC technology to establish in vitro biological models of the human duodenum. The intestinal epithelial cells cultured in the chip were obtained from endoscopic biopsies or organ resections. This chip represented the closest model to the living duodenum and reproduced key features of the small intestine. Recent findings enhanced our knowledge of the intestinal microbiome  and intestinal morphology .
An array of physiological pathways requires continuous media circulation and inter-tissue interactions. Single organ chips fail to fully reflect the complexity, functional changes, and integrity of organ function . The “multi-organ-on-a-chip”, otherwise referred to as the “human-on-a-chip”  simultaneously constructs multiple organs attracting obvious research attention. Multi-organs-on-a-chip culture cells of different organs and tissues simultaneously which are connected by channels (bionic blood vessel ), to achieve multi-organ integration, permitting the examination of interactions to establish a system [100, 101]. These can be separated into static, semi-static and flexible approaches . Static multiple organs are integrated into single connected devices. In semi-static systems, the organs are joined via fluidic networks with Transwell®-based  tissue inserts. In the flexible system, individual organ-specific platforms are interconnected using flexible microchannels. In such systems, the flexible nature is advantageous and recreates multiple organs . Although the multi-organs-on-a-chip concept remains in its infancy, major breakthroughs have been made, including the design of two-organs [104, 105], three-organs [106, 107], four-organs [108, 109], and ten organs on the chip .
In 2010, Van et al.  were the first to combine liver and intestines in a microfluidic device. The intestine and liver slices functioned on the chip and demonstrated its applicability to organ interactions including the regulation of bile acid synthesis. This system enabled in vitro studies and provided insight into organ–organ interactions. A larger number of organs have since been concentrated onto individual chips. Organ chips are required to maintain stable fluid connection, avoid bacterial contamination, and monitor cell viability throughout the culture process. As the number of organs on the chip increases, the complexity of the system is enhanced, inevitably leading to unpredictable results. Simplifying existing systems is critical to achieving a wider range of applications. Lee et al.  fabricated pumpless, user-friendly multi-organs-on-a-chip which were easily assembled and operated. Satoh et al. reported a multi-throughput multi-organ-on-a-chip system formed on a pneumatic pressure-driven medium circulation platform that was microplate-sized (Fig. 6) . This system possesses the following advantages for application to drug discovery: simultaneous operation of multiple multi-organ culture units, design flexibility of the microfluidic network, a pipette-friendly liquid handling interface, and applicability to experimental protocols and analytical methods widely used in microplates. This multi-organ culture platform will be an advantageous research tool for drug discovery.
The continued development of OOAC was dependent on advances in design, modeling, manufacturability, and usability. Lantada et al.  produced an innovative combination of laser technologies. The assessment of human mesenchymal stem cells verified the effectiveness of the technique and the resultant chip was transparent, facilitating imaging procedures. Such technologies are feasible for mass-produced chips and hold utility for energy, transportation and aerospace industries.
OOAC technology has developed rapidly in recent years and has enhanced our knowledge of all the major organs. Others not discussed in this review include blood vessels [99, 114, 115], the skin [116, 117], the BBB [118, 119], skeletal muscle [120, 121], and the CNS [122, 123].
Stem cell engineering
The source of biological tissue is one of the most important parameters in OOAC design. Stem cells can be extracted from humans without tissue biopsy . By definition, a stem cell is any cell that is self-renewing and has the potential to differentiate into one or more specialized cell types. The most common types include embryonic stem cells (ESCs), induced pluripotent stem cells (iPSCs), and adult stem cells (ASCs). These cells can be used as a biological tissue source for OOAC (Fig. 7) . The most common human ASCs are mesenchymal stem cells (MSCs) which are pluripotent stem cells extracted from adult tissue . Bone marrow mesenchymal stem (bMSCs) cells are typically derived from bone marrow or adipose tissue, making them an attractive option due to their ease of extraction from tissue biopsies . Due to their limited ability to differentiate, lack of consistent derivation protocols and clear biological responses, MSCs are less useful in OOAC models than their pluripotent counterparts. Human ESCs originate from blastocysts or internal cells of the embryo. Dependent on the source, they can be pluripotent and differentiate into any type of adult cell from any of the three germ layers . However, human ESCs must be derived from human embryos which is ethically controversial, in turn leading to regulations and restrictions. Due to the ethical debate surrounding ESCs and the technical difficulties of producing large numbers of genetically diverse cell lines, it is more difficult to apply human ESCs to clinical trials than their use as precision drug replacements in disease models for therapeutic drug evaluation . Like ESCs, MSCs are pluripotent and can differentiate from all three germ layers . As iPSCs are derived from adult tissue rather than embryonic tissue, they avoid the ethical issues associated with ESCs. No significant differences in gene expression levels, surface marker expression, and morphology between ESCs and iPSCs are observed in cells from the same genetic background [131, 132]. In addition to circumventing ethical controversies, another advantage of iPSCs over ESCs is that they can be obtained from donors of known disease phenotypes, which can be used for patient-specific disease models and drug screening.
Since stem cells are more readily available than many primitive cell types and tissue biopsies, and they are more physiologically representative than other cell lines and are likely to become the main tissue source for future OOAC (Fig. 8) . Continued research into the methods by which stem cells differentiate into functional organ models on chips will contribute to improvements in stem cell methods and advances in OOAC technology [125, 134].
Conclusion and future perspectives
We have reviewed recent progress in OOAC technology. Microfluidic chips provide favorable support for the development of OOAC. Its development has attracted worldwide research attention and great scientific advances have been made. A large number of OOACs have been designed and prepared. An array of human organs has been studied. The ultimate goal of OOAC is to integrate numerous organs into a single chip, and to build a more complex multi-organ chip model, finally achieving a “Human-on-a-chip”.
Although OOAC technology has developed rapidly, the human-on-a-chip theory remains distant. PDMS is the most widely employed material, but comes with disadvantages as the resultant film is thicker than the in vivo morphology. A decreased absorbance of small hydrophobic molecules influences solvent efficacy and toxicity. It is thus necessary to identify suitable alternative materials. At present, the cost of manufacturing and experimental implementation is relatively expensive, which is not conducive to the widespread use of organ chips, so components must be of low cost and easy to dispose. More expensive components should be reusable. In terms of integrated system components, the media volume and connector size must be reduced for general use. Collecting samples on the chip may interfere with its operation, resulting in changes in the concentration of various metabolites. More suitable sensors are thus required. Universal cell culture mediums suitable for all organs are also required. Most critically, as the number of organs on the chip increases, functionality becomes more complex and generated data carry artefactual and non-translatable risks. This is currently unsolvable. In the case of long-term repeated administration or on-chip studies, the biomarkers identified in vitro may not fully reflect the in vivo equivalent.
Availability of data and materials
Antigen presenting cells
Decellularized liver matrixes
Lung assist devices
Embryonic stem cells
Induced pluripotent stem cells
Adult stem cells
Bone marrow mesenchymal stem
Whitesides GM. The origins and the future of microfluidics. Nature. 2006;442:368–73. https://0-doi-org.brum.beds.ac.uk/10.1038/nature05058.
Squires TM, Quake SR. Microfluidics: fluid physics at the nanoliter scale. Rev Mod Phys. 2005;77:977–1026. https://0-doi-org.brum.beds.ac.uk/10.1103/RevModPhys.77.977.
Daw R, Finkelstein J. Lab on a chip. Nature. 2006;442:367.
Mitchell P. Microfluidics–downsizing large-scale biology. Nat Biotechnol. 2001;19:717–21.
Figeys D, Pinto D. Lab-on-a-chip: a revolution in biological and medical sciences. Anal Chem. 2000;72:330A.
Haeberle S, Zengerle R. Microfluidic platforms for lab-on-a-chip applications. Lab Chip. 2007;7:1094–110.
Kwon J-S, Oh J. Microfluidic technology for cell manipulation. Appl Sci. 2018;8:992. https://0-doi-org.brum.beds.ac.uk/10.3390/app8060992.
Sosa-Hernández JE, Villalba-Rodríguez AM, Romero-Castillo KD, Aguilar-Aguila-Isaías MA, García-Reyes IE, Hernández-Antonio A, Ahmed I, Sharma A, Parra-Saldívar R, Iqbal HMN. Organs-on-a-chip module: a review from the development and applications perspective. Micromachines (Basel). 2018. https://0-doi-org.brum.beds.ac.uk/10.3390/mi9100536.
Ahmed I, Akram Z, Bule M, Iqbal H. Advancements and potential applications of microfluidic approaches—a review. Chemosensors. 2018;6:46. https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors6040046.
Top Ten Emerging Technologies. 2016. https://www.weforum.org/agenda/2016/06/top-10-emerging-technologies-2016/.
Wang L, Liu W, Wang Y, Wang JC, Tu Q, Liu R, Wang J. Construction of oxygen and chemical concentration gradients in a single microfluidic device for studying tumor cell-drug interactions in a dynamic hypoxia microenvironment. Lab Chip. 2013;13:695–705.
Galie PA, Nguyen DHT, Choi CK, Cohen DM, Janmey PA, Chen CS. Fluid shear stress threshold regulates angiogenic sprouting. Proc Natl Acad Sci USA. 2014;111:7968–73.
Ho CT, Lin RZ, Chen RJ, Chin CK, Gong SE, Chang HY, Peng HL, Hsu L, Yew TR, Chang SF. Liver-cell patterning lab chip: mimicking the morphology of liver lobule tissue. Lab Chip. 2013;13:3578–87.
Booth R, Kim H. Characterization of a microfluidic in vitro model of the blood-brain barrier (μBBB). Lab Chip. 2012;12:1784–92. https://0-doi-org.brum.beds.ac.uk/10.1039/c2lc40094d.
Sung JH, Shuler ML. A micro cell culture analog (microCCA) with 3-D hydrogel culture of multiple cell lines to assess metabolism-dependent cytotoxicity of anti-cancer drugs. Lab Chip. 2009;9:1385–94. https://0-doi-org.brum.beds.ac.uk/10.1039/b901377f.
Bhatia SN, Ingber DE. Microfluidic organs-on-chips. Nat Biotechnol. 2014;32:760–72.
Heylman C, Sobrino A, Shirure VS, Hughes CC, George SC. A strategy for integrating essential three-dimensional microphysiological systems of human organs for realistic anticancer drug screening. Exp Biol Med (Maywood). 2014;239:1240–54. https://0-doi-org.brum.beds.ac.uk/10.1177/1535370214525295.
Kieninger J, Weltin A, Flamm H, Urban GA. Microsensor systems for cell metabolism—from 2D culture to organ-on-chip. Lab Chip. 2018;18:1274–91. https://0-doi-org.brum.beds.ac.uk/10.1039/c7lc00942a.
Halldorsson S, Lucumi E, Gómez-Sjöberg R, Fleming RMT. Advantages and challenges of microfluidic cell culture in polydimethylsiloxane devices. Biosens Bioelectron. 2015;63:218–31. https://0-doi-org.brum.beds.ac.uk/10.1016/j.bios.2014.07.029.
Paguirigan AL, Beebe DJ. Microfluidics meet cell biology: bridging the gap by validation and application of microscale techniques for cell biological assays. BioEssays. 2008;30:811–21.
Sung JH, Esch MB, Prot J-M, Long CJ, Smith A, Hickman JJ, Shuler ML. Microfabricated mammalian organ systems and their integration into models of whole animals and humans. Lab Chip. 2013;13:1201–12. https://0-doi-org.brum.beds.ac.uk/10.1039/c3lc41017j.
Jiang K, Dong C, Xu Y, Wang L. Microfluidic-based biomimetic models for life science research. RSC Adv. 2016;6:26863–73. https://0-doi-org.brum.beds.ac.uk/10.1039/C6RA05691A.
van der Meer AD, van den Berg A. Organs-on-chips: breaking the in vitro impasse. Integr Biol (Camb). 2012;4:461–70. https://0-doi-org.brum.beds.ac.uk/10.1039/c2ib00176d.
Al-Lamki RS, Bradley JR, Pober JS. Human organ culture: updating the approach to bridge the gap from in vitro to in vivo in inflammation, cancer, and stem cell biology. Front. Med. (Lausanne). 2017;4:148. https://0-doi-org.brum.beds.ac.uk/10.3389/fmed.2017.00148.
Alépée N. State-of-the-art of 3D cultures (organs-on-a-chip) in safety testing and pathophysiology. Altex. 2014. https://0-doi-org.brum.beds.ac.uk/10.14573/altex1406111.
Lee SH, Jun B-H. Advances in dynamic microphysiological organ-on-a-chip: design principle and its biomedical application. J Ind Eng Chem. 2019;71:65–77. https://0-doi-org.brum.beds.ac.uk/10.1016/j.jiec.2018.11.041.
Reardon S. ‘Organs-on-chips’ go mainstream. Nature. 2015;523:266. https://0-doi-org.brum.beds.ac.uk/10.1038/523266a.
Young EWK, Beebe DJ. Fundamentals of microfluidic cell culture in controlled microenvironments. Chem Soc Rev. 2010;39:1036–48.
Theobald J, Ghanem A, Wallisch P, Banaeiyan AA, Andradenavarro MA, Taskova K, Haltmeier M, Kurtz A, Becker H, Reuter S. Liver-kidney-on-chip to study toxicity of drug metabolites. ACS Biomater Sci Eng. 2018;4(1):78–89.
Davies PF. Flow-mediated endothelial mechanotransduction. Physiol Rev. 1995;75:519–60.
Haddrick M, Simpson PB. Organ-on-a-chip technology: turning its potential for clinical benefit into reality. Drug Discov Today. 2019;24:1217–23. https://0-doi-org.brum.beds.ac.uk/10.1016/j.drudis.2019.03.011.
Ronaldsonbouchard K, Vunjaknovakovic G. Organs-on-a-chip: a fast track for engineered human tissues in drug development. Cell Stem Cell. 2018;22:310–24.
Yang KS, Cheng YC, Jeng MS, Chien KH, Shyu JC. An experimental investigation of micro pulsating heat pipes. Micromachines (Basel). 2014;5:869–72.
Nguyen DHT, Stapleton SC, Yang MT, Cha SS, Choi CK, Galie PA, Chen CS. Biomimetic model to reconstitute angiogenic sprouting morphogenesis in vitro. Proc Natl Acad Sci USA. 2013;110:6712–7.
Song JW, Daubriac J, Tse JM, Bazou D, Munn LL. RhoA mediates flow-induced endothelial sprouting in a 3-D tissue analogue of angiogenesis. Lab Chip. 2012;12:5000–6.
Sato T, Clevers H. Growing self-organizing mini-guts from a single intestinal stem cell: mechanism and applications. Science. 2013;340:1190–4.
Sellgren KL, Hawkins BT, Grego S. An optically transparent membrane supports shear stress studies in a three-dimensional microfluidic neurovascular unit model. Biomicrofluidics. 2015;9:687.
Yang SH, Jin WC, Huh D, Jo HA, Kim S, Lim CS, Lee JC, Kim HC, Kwon HM, Chang WJ. Roles of fluid shear stress and retinoic acid in the differentiation of primary cultured human podocytes. Exp Cell Res. 2017;354:48–56.
Kshitiz, Park J, Kim P, Helen W, Engler AJ, Levchenko A, Kim DH. Control of stem cell fate and function by engineering physical microenvironments. Integr Biol. 2012;4:1008.
Jang KJ, Cho HS, Kang DH, Bae WG, Kwon TH, Suh KY. Fluid-shear-stress-induced translocation of aquaporin-2 and reorganization of actin cytoskeleton in renal tubular epithelial cells. Integr Biol. 2010;3:134–41.
Zhou J, Khodakov DA, Ellis AV, Voelcker NH. Surface modification for PDMS-based microfluidic devices. Electrophoresis. 2012;33:89–104.
Tibbe MP, Leferink AM, van den Berg A, Eijkel JCT, Segerink LI. Microfluidic gel patterning method by use of a temporary membrane for organ-on-chip applications. Adv Mater Technol. 2018;3:1700200. https://0-doi-org.brum.beds.ac.uk/10.1002/admt.201700200.
Xue D, Wang Y, Zhang J, Mei D, Wang Y, Chen S. Projection-based 3D printing of cell patterning Scaffolds with multiscale channels. ACS Appl Mater Interfaces. 2018;10:19428–35. https://0-doi-org.brum.beds.ac.uk/10.1021/acsami.8b03867.
Li Y-C, Lin M-W, Yen M-H, Fan SM-Y, Wu J-T, Young T-H, Cheng J-Y, Lin S-J. Programmable laser-assisted surface microfabrication on a poly(vinyl alcohol)-coated glass chip with self-changing cell adhesivity for heterotypic cell patterning. ACS Appl Mater Interfaces. 2015;7:22322–32. https://0-doi-org.brum.beds.ac.uk/10.1021/acsami.5b05978.
Mandenius C-F. Conceptual design of micro-bioreactors and organ-on-chips for studies of cell cultures. Bioengineering (Basel). 2018. https://0-doi-org.brum.beds.ac.uk/10.3390/bioengineering5030056.
Sun X, Nunes SS. Maturation of human stem cell-derived cardiomyocytes in biowires using electrical stimulation. J Vis Exp Jove. 2017;2017(123). https://0-doi-org.brum.beds.ac.uk/10.3791/55373.
Yang PC, Qi Y, Zhang DH. Studies, bottlenecks and challenges of microarray of micro organs. Chin J Tissue Eng Res. 2018;22:5234–40. https://0-doi-org.brum.beds.ac.uk/10.3969/j.issn.2095-4344.0558.
Peel S, Corrigan AM, Ehrhardt B, Jang K-J, Caetano-Pinto P, Boeckeler M, Rubins JE, Kodella K, Petropolis DB, Ronxhi J, et al. Introducing an automated high content confocal imaging approach for organs-on-chips. Lab Chip. 2019;19:410–21. https://0-doi-org.brum.beds.ac.uk/10.1039/c8lc00829a.
Kane KIW, Moreno EL, Hachi S, Walter M, Jarazo J, Oliveira MAP, Hankemeier T, Vulto P, Schwamborn JC, Thoma M, et al. Automated microfluidic cell culture of stem cell derived dopaminergic neurons. Sci Rep. 2019;9:1796. https://0-doi-org.brum.beds.ac.uk/10.1038/s41598-018-34828-3.
Mccuskey RS. The hepatic microvascular system in health and its response to toxicants. Anat Rec. 2010;291:661–71.
Cho CH, Park J, Tilles AW, Berthiaume F, Toner M, Yarmush ML. Layered patterning of hepatocytes in co-culture systems using microfabricated stencils. Biotechniques. 2018;48:47–52.
Kane BJ, Zinner MJ, Yarmush ML, Toner M. Liver-specific functional studies in a microfluidic array of primary mammalian hepatocytes. Anal Chem. 2006;78:4291–8. https://0-doi-org.brum.beds.ac.uk/10.1021/ac051856v.
Lee PJ, Hung PJ, Lee LP. An artificial liver sinusoid with a microfluidic endothelial-like barrier for primary hepatocyte culture. Biotechnol Bioeng. 2007;97:1340–6. https://0-doi-org.brum.beds.ac.uk/10.1002/bit.21360.
Hegde M, Jindal R, Bhushan A, Bale SS, Mccarty WJ, Golberg I, Usta OB, Yarmush ML. Dynamic interplay of flow and collagen stabilizes primary hepatocytes culture in a microfluidic platform. Lab Chip. 2014;14:2033–9.
Fan A, Qu Y, Liu X, Zhong R, Yong L. Organ-on-a-chip: new platform for biological analysis. Anal Chem Insights. 2015;10:39–45.
Ma L-D, Wang Y-T, Wang J-R, Wu J-L, Meng X-S, Hu P, Mu X, Liang Q-L, Luo G-A. Design and fabrication of a liver-on-a-chip platform for convenient, highly efficient, and safe in situ perfusion culture of 3D hepatic spheroids. Lab Chip. 2018;18:2547–62. https://0-doi-org.brum.beds.ac.uk/10.1039/c8lc00333e.
Yum K, Hong SG, Healy KE, Lee LP. Physiologically relevant organs on chips (pages 16–27). Biotechnol J. 2014;9:16–27.
Riahi R, Shaegh SAM, Ghaderi M, Zhang YS, Su RS, Aleman J, Massa S, Kim D, Dokmeci MR, Khademhosseini A. Automated microfluidic platform of bead-based electrochemical immunosensor integrated with bioreactor for continual monitoring of cell secreted biomarkers. Sci Rep. 2016;6:24598.
Chong LH, Li H, Wetzel I, Cho H, Toh Y-C. A liver-immune coculture array for predicting systemic drug-induced skin sensitization. Lab Chip. 2018;18:3239–50. https://0-doi-org.brum.beds.ac.uk/10.1039/c8lc00790j.
Lu S, Cuzzucoli F, Jiang J, Liang L-G, Wang Y, Kong M, Zhao X, Cui W, Li J, Wang S. Development of a biomimetic liver tumor-on-a-chip model based on decellularized liver matrix for toxicity testing. Lab Chip. 2018;18:3379–92. https://0-doi-org.brum.beds.ac.uk/10.1039/c8lc00852c.
Kang YBA, Sodunke TR, Lamontagne J, Cirillo J, Rajiv C, Bouchard MJ, Noh M. Liver sinusoid on a chip: long-term layered co-culture of primary rat hepatocytes and endothelial cells in microfluidic platforms. Biotechnol Bioeng. 2015;112:2571–82.
Zhou Q, Patel D, Kwa T, Haque A, Matharu Z, Stybayeva G, Gao Y, Diehl AM, Revzin A. Liver injury-on-a-chip: microfluidic co-cultures with integrated biosensors for monitoring liver cell signaling during injury. Lab Chip. 2015;15:4467–78. https://0-doi-org.brum.beds.ac.uk/10.1039/C5LC00874C.
Guenat OT, Berthiaume F. Incorporating mechanical strain in organs-on-a-chip: lung and skin. Biomicrofluidics. 2018;12:42207. https://0-doi-org.brum.beds.ac.uk/10.1063/1.5024895.
Huh D, Matthews BD, Mammoto A, Montoya-Zavala M, Hsin HY, Ingber DE. Reconstituting organ-level lung functions on a chip. Science. 2010;328:1662–8. https://0-doi-org.brum.beds.ac.uk/10.1126/science.1188302.
Dongeun H, Leslie DC, Matthews BD, Fraser JP, Samuel J, Hamilton GA, Thorneloe KS, Michael Allen M, Ingber DE. A human disease model of drug toxicity-induced pulmonary edema in a lung-on-a-chip microdevice. Sci Transl Med. 2012;4:159ra147.
Stucki AO, Stucki JD, Hall SRR, Felder M, Mermoud Y, Schmid RA, Geiser T, Guenat OT. A lung-on-a-chip array with an integrated bio-inspired respiration mechanism. Lab Chip. 2015;15:1302–10. https://0-doi-org.brum.beds.ac.uk/10.1039/c4lc01252f.
Blume C, Reale R, Held M, Millar TM, Collins JE, Davies DE, Morgan H, Swindle EJ. Temporal monitoring of differentiated human airway epithelial cells using microfluidics. PLoS ONE. 2015;10:e0139872. https://0-doi-org.brum.beds.ac.uk/10.1371/journal.pone.0139872.
Humayun M, Chow C-W, Young EWK. Microfluidic lung airway-on-a-chip with arrayable suspended gels for studying epithelial and smooth muscle cell interactions. Lab Chip. 2018;18:1298–309. https://0-doi-org.brum.beds.ac.uk/10.1039/c7lc01357d.
Yang X, Li K, Zhang X, Liu C, Guo B, Wen W, Gao X. Nanofiber membrane supported lung-on-a-chip microdevice for anti-cancer drug testing. Lab Chip. 2018;18:486–95. https://0-doi-org.brum.beds.ac.uk/10.1039/c7lc01224a.
Peng J, Rochow N, Dabaghi M, Bozanovic R, Jansen J, Predescu D, DeFrance B, Lee SY, Fusch G, Ravi Selvaganapathy P, et al. Postnatal dilatation of umbilical cord vessels and its impact on wall integrity: prerequisite for the artificial placenta. Int J Artif Organs. 2018;41:393–9.
Dabaghi M, Fusch G, Saraei N, Rochow N, Brash JL, Fusch C, Ravi Selvaganapathy P. An artificial placenta type microfluidic blood oxygenator with double-sided gas transfer microchannels and its integration as a neonatal lung assist device. Biomicrofluidics. 2018;12:44101. https://0-doi-org.brum.beds.ac.uk/10.1063/1.5034791.
Xu Z, Gao Y, Hao Y, Li E, Wang Y, Zhang J, Wang W, Gao Z, Wang Q. Application of a microfluidic chip-based 3D co-culture to test drug sensitivity for individualized treatment of lung cancer. Biomaterials. 2013;34:4109–17.
Benam KH, Villenave R, Lucchesi C, Varone A, Ingber DE. Small airway-on-a-chip enables analysis of human lung inflammation and drug responses in vitro. Nat Methods. 2015;13:151.
Jang K-J, Suh K-Y. A multi-layer microfluidic device for efficient culture and analysis of renal tubular cells. Lab Chip. 2010;10:36–42. https://0-doi-org.brum.beds.ac.uk/10.1039/b907515a.
Jang K-J, Mehr AP, Hamilton GA, Mcpartlin LA, Chung S, Suh K-Y, Ingber DE. Human kidney proximal tubule-on-a-chip for drug transport and nephrotoxicity assessment. Integr Biol (Camb). 2013;5:1119–29. https://0-doi-org.brum.beds.ac.uk/10.1039/c3ib40049b.
Musah S, Dimitrakakis N, Camacho DM, Church GM, Ingber DE. Directed differentiation of human induced pluripotent stem cells into mature kidney podocytes and establishment of a glomerulus chip. Nat Protoc. 2018;13:1662–85. https://0-doi-org.brum.beds.ac.uk/10.1038/s41596-018-0007-8.
Sakolish CM, Philip B, Mahler GJ. A human proximal tubule-on-a-chip to study renal disease and toxicity. Biomicrofluidics. 2019;13:14107. https://0-doi-org.brum.beds.ac.uk/10.1063/1.5083138.
Schutgens F, Rookmaaker MB, Margaritis T, Rios A, Ammerlaan C, Jansen J, Gijzen L, Vormann M, Vonk A, Viveen M, et al. Tubuloids derived from human adult kidney and urine for personalized disease modeling. Nat Biotechnol. 2019;37:303–13. https://0-doi-org.brum.beds.ac.uk/10.1038/s41587-019-0048-8.
Nieskens TTG, Sjögren A-K. Emerging in vitro systems to screen and predict drug-induced kidney toxicity. Semin Nephrol. 2019;39:215–26. https://0-doi-org.brum.beds.ac.uk/10.1016/j.semnephrol.2018.12.009.
Visone R, Gilardi M, Marsano A, Rasponi M, Bersini S, Moretti M. Cardiac meets skeletal: what’s new in microfluidic models for muscle tissue engineering. Molecules. 2016. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules21091128.
Grosberg A, Nesmith AP, Goss JA, Brigham MD, McCain ML, Parker KK. Muscle on a chip: in vitro contractility assays for smooth and striated muscle. J Pharmacol Toxicol Methods. 2012;65:126–35. https://0-doi-org.brum.beds.ac.uk/10.1016/j.vascn.2012.04.001.
Zhang D, Shadrin I, Lam J, Xian HQ, Snodgrass R, Bursac N. Tissue-engineered cardiac patch for advanced functional maturation of human ESC-derived cardiomyocytes. Biomaterials. 2013;34:5813–20.
Zhang YS, Arneri A, Bersini S, Shin S-R, Zhu K, Goli-Malekabadi Z, Aleman J, Colosi C, Busignani F, Dell’Erba V, et al. Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip. Biomaterials. 2016;110:45–59. https://0-doi-org.brum.beds.ac.uk/10.1016/j.biomaterials.2016.09.003.
Zhang X, Wang T, Wang P, Hu N. High-throughput assessment of drug cardiac safety using a high-speed impedance detection technology-based heart-on-a-chip. Micromachines (Basel). 2016. https://0-doi-org.brum.beds.ac.uk/10.3390/mi7070122.
Marsano A, Conficconi C, Lemme M, Occhetta P, Gaudiello E, Votta E, Cerino G, Redaelli A, Rasponi M. Beating heart on a chip: a novel microfluidic platform to generate functional 3D cardiac microtissues. Lab Chip. 2016;16:599–610. https://0-doi-org.brum.beds.ac.uk/10.1039/c5lc01356a.
Schneider O, Zeifang L, Fuchs S, Sailer C, Loskill P. User-friendly and parallelized generation of human induced pluripotent stem cell-derived microtissues in a centrifugal heart-on-a-chip. Tissue Eng Part A. 2019;25:786–98. https://0-doi-org.brum.beds.ac.uk/10.1089/ten.TEA.2019.0002.
Tzatzalos E, Abilez OJ, Shukla P, Wu JC. Engineered heart tissues and induced pluripotent stem cells: macro- and microstructures for disease modeling, drug screening, and translational studies. Adv Drug Deliv Rev. 2016;96:234–44.
Kang TH, Kim HJ. Farewell to animal testing: innovations on human intestinal microphysiological systems. Micromachines (Basel). 2016. https://0-doi-org.brum.beds.ac.uk/10.3390/mi7070107.
Imura Y, Asano Y, Sato K, Yoshimura E. A microfluidic system to evaluate intestinal absorption. Anal Sci. 2009;2009(25):1403–7.
Sung JH, Yu J, Luo D, Shuler ML, March JC. Microscale 3-D hydrogel scaffold for biomimetic gastrointestinal (GI) tract model. Lab Chip. 2011;11:389–92. https://0-doi-org.brum.beds.ac.uk/10.1039/c0lc00273a.
Kim HJ, Huh D, Hamilton G, Ingber DE. Human gut-on-a-chip inhabited by microbial flora that experiences intestinal peristalsis-like motions and flow. Lab Chip. 2012;12:2165–74. https://0-doi-org.brum.beds.ac.uk/10.1039/c2lc40074j.
Kim HJ, Li H, Collins JJ, Ingber DE. Contributions of microbiome and mechanical deformation to intestinal bacterial overgrowth and inflammation in a human gut-on-a-chip. Proc Natl Acad Sci USA. 2016;113:E7–15. https://0-doi-org.brum.beds.ac.uk/10.1073/pnas.1522193112.
Kasendra M, Tovaglieri A, Sontheimer-Phelps A, Jalili-Firoozinezhad S, Bein A, Chalkiadaki A, Scholl W, Zhang C, Rickner H, Richmond CA, et al. Development of a primary human small intestine-on-a-chip using biopsy-derived organoids. Sci Rep. 2018;8:2871. https://0-doi-org.brum.beds.ac.uk/10.1038/s41598-018-21201-7.
Vandussen KL, Marinshaw JM, Nurmohammad S, Hiroyuki M, Clara M, Tarr PI, Ciorba MA, Stappenbeck TS. Development of an enhanced human gastrointestinal epithelial culture system to facilitate patient-based assays. Gut. 2014;64:911.
Jalili-Firoozinezhad S, Gazzaniga FS, Calamari EL, Camacho DM, Fadel CW, Bein A, Swenor B, Nestor B, Cronce MJ, Tovaglieri A, et al. A complex human gut microbiome cultured in an anaerobic intestine-on-a-chip. Nat Biomed Eng. 2019. https://0-doi-org.brum.beds.ac.uk/10.1038/s41551-019-0397-0.
Shin W, Hinojosa CD, Ingber DE, Kim HJ. Human intestinal morphogenesis controlled by transepithelial morphogen gradient and flow-dependent physical cues in a microengineered gut-on-a-chip. iScience. 2019;15:391–406.
Lee SH, Sung JH. Microtechnology-based multi-organ models. Bioengineering (Basel). 2017. https://0-doi-org.brum.beds.ac.uk/10.3390/bioengineering4020046.
Marx U, Walles H, Hoffmann S, Lindner G, Horland R, Sonntag F, Klotzbach U, Sakharov D, Tonevitsky A, Lauster R. ‘Human-on-a-chip’ developments: a translational cutting-edge alternative to systemic safety assessment and efficiency evaluation of substances in laboratory animals and man? Altern Lab Anim. 2012;40:235–57. https://0-doi-org.brum.beds.ac.uk/10.1177/026119291204000504.
Zhang B, Montgomery M, Chamberlain MD, Ogawa S, Korolj A, Pahnke A, Wells LA, Massé S, Kim J, Reis L, et al. Biodegradable scaffold with built-in vasculature for organ-on-a-chip engineering and direct surgical anastomosis. Nat Mater. 2016;15:669–78. https://0-doi-org.brum.beds.ac.uk/10.1038/nmat4570.
Palaninathan V, Kumar V, Maekawa T, Liepmann D, Paulmurugan R, Eswara JR, Ajayan PM, Augustine S, Malhotra BD, Viswanathan S, et al. Multi-organ on a chip for personalized precision medicine. MRC. 2018;8:652–67. https://0-doi-org.brum.beds.ac.uk/10.1557/mrc.2018.148.
Zhao Y, Kankala RK, Wang S-B, Chen A-Z. Multi-organs-on-chips: towards long-term biomedical investigations. Molecules. 2019. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules24040675.
Rogal J, Probst C, Loskill P. Integration concepts for multi-organ chips: how to maintain flexibility?! Future Sci OA. 2017;3:FSO180. https://0-doi-org.brum.beds.ac.uk/10.4155/fsoa-2016-0092.
Wagner I, Materne E-M, Brincker S, Süssbier U, Frädrich C, Busek M, Sonntag F, Sakharov DA, Trushkin EV, Tonevitsky AG, et al. A dynamic multi-organ-chip for long-term cultivation and substance testing proven by 3D human liver and skin tissue co-culture. Lab Chip. 2013;13:3538–47. https://0-doi-org.brum.beds.ac.uk/10.1039/c3lc50234a.
van Midwoud PM, Merema MT, Verpoorte E, Groothuis GMM. A microfluidic approach for in vitro assessment of interorgan interactions in drug metabolism using intestinal and liver slices. Lab Chip. 2010;10:2778–86. https://0-doi-org.brum.beds.ac.uk/10.1039/c0lc00043d.
Tsamandouras N, Wen LKC, Edington CD, Stokes CL, Griffith LG, Cirit M. Integrated gut and liver microphysiological systems for quantitative in vitro pharmacokinetic studies. Aaps J. 2017;19:1–14.
Skardal A, Murphy SV, Devarasetty M, Mead I, Kang H-W, Seol Y-J, Shrike Zhang Y, Shin S-R, Zhao L, Aleman J, et al. Multi-tissue interactions in an integrated three-tissue organ-on-a-chip platform. Sci Rep. 2017;7:8837. https://0-doi-org.brum.beds.ac.uk/10.1038/s41598-017-08879-x.
Maschmeyer I, Hasenberg T, Jaenicke A, Lindner M, Lorenz AK, Zech J, Garbe L-A, Sonntag F, Hayden P, Ayehunie S, et al. Chip-based human liver-intestine and liver-skin co-cultures–A first step toward systemic repeated dose substance testing in vitro. Eur J Pharm Biopharm. 2015;95:77–87. https://0-doi-org.brum.beds.ac.uk/10.1016/j.ejpb.2015.03.002.
Maschmeyer I, Lorenz AK, Schimek K, Hasenberg T, Ramme AP, Hübner J, Lindner M, Drewell C, Bauer S, Thomas A, et al. A four-organ-chip for interconnected long-term co-culture of human intestine, liver, skin and kidney equivalents. Lab Chip. 2015;15:2688–99. https://0-doi-org.brum.beds.ac.uk/10.1039/c5lc00392j.
Oleaga C, Bernabini C, Smith AST, Srinivasan B, Jackson M, McLamb W, Platt V, Bridges R, Cai Y, Santhanam N, et al. Multi-Organ toxicity demonstration in a functional human in vitro system composed of four organs. Sci Rep. 2016;6:20030. https://0-doi-org.brum.beds.ac.uk/10.1038/srep20030.
Edington CD, Chen WLK, Geishecker E, Kassis T, Soenksen LR, Bhushan BM, Freake D, Kirschner J, Maass C, Tsamandouras N, et al. Interconnected microphysiological systems for quantitative biology and pharmacology studies. Sci Rep. 2018;8:4530. https://0-doi-org.brum.beds.ac.uk/10.1038/s41598-018-22749-0.
Lee H, Kim DS, Ha SK, Choi I, Lee JM, Sung JH. A pumpless multi-organ-on-a-chip (MOC) combined with a pharmacokinetic-pharmacodynamic (PK-PD) model. Biotechnol Bioeng. 2017;114:432–43. https://0-doi-org.brum.beds.ac.uk/10.1002/bit.26087.
Satoh T, Sugiura S, Shin K, Onuki-Nagasaki R, Ishida S, Kikuchi K, Kakiki M, Kanamori T. A multi-throughput multi-organ-on-a-chip system on a plate formatted pneumatic pressure-driven medium circulation platform. Lab Chip. 2017;18:115–25. https://0-doi-org.brum.beds.ac.uk/10.1039/c7lc00952f.
Díaz Lantada A, Pfleging W, Besser H, Guttmann M, Wissmann M, Plewa K, Smyrek P, Piotter V, García-Ruíz JP. Research on the methods for the mass production of multi-scale organs-on-chips. Polymers (Basel). 2018. https://0-doi-org.brum.beds.ac.uk/10.3390/polym10111238.
Wang Y, Huang X, Shen Y, Hang R, Zhang X, Wang Y, Yao X, Tang B. Direct writing alginate bioink inside pre-polymers of hydrogels to create patterned vascular networks. J Mater Sci. 2019;54:7883–92. https://0-doi-org.brum.beds.ac.uk/10.1007/s10853-019-03447-2.
Hong S, Kang EY, Byeon J, Jung S-H, Hwang C. Embossed membranes with vascular patterns guide vascularization in a 3D tissue model. Polymers (Basel). 2019. https://0-doi-org.brum.beds.ac.uk/10.3390/polym11050792.
Torras N, García-Díaz M, Fernández-Majada V, Martínez E. Mimicking epithelial tissues in three-dimensional cell culture models. Front Bioeng Biotechnol. 2018;6:197. https://0-doi-org.brum.beds.ac.uk/10.3389/fbioe.2018.00197.
Alexander FA, Eggert S, Wiest J. Skin-on-a-chip: transepithelial electrical resistance and extracellular acidification measurements through an automated air-liquid interface. Genes (Basel). 2018. https://0-doi-org.brum.beds.ac.uk/10.3390/genes9020114.
Wang YI, Abaci HE, Shuler ML. Microfluidic blood-brain barrier model provides in vivo-like barrier properties for drug permeability screening. Biotechnol Bioeng. 2017;114:184–94. https://0-doi-org.brum.beds.ac.uk/10.1002/bit.26045.
Wevers NR, Kasi DG, Gray T, Wilschut KJ, Smith B, van Vught R, Shimizu F, Sano Y, Kanda T, Marsh G, et al. A perfused human blood-brain barrier on-a-chip for high-throughput assessment of barrier function and antibody transport. Fluids Barriers CNS. 2018;15:23. https://0-doi-org.brum.beds.ac.uk/10.1186/s12987-018-0108-3.
Khodabukus A, Madden L, Prabhu NK, Koves TR, Jackman CP, Muoio DM, Bursac N. Electrical stimulation increases hypertrophy and metabolic flux in tissue-engineered human skeletal muscle. Biomaterials. 2019;198:259–69. https://0-doi-org.brum.beds.ac.uk/10.1016/j.biomaterials.2018.08.058.
Kim W, Kim J, Park H-S, Jeon JS. Development of microfluidic stretch system for studying recovery of damaged skeletal muscle cells. Micromachines (Basel). 2018. https://0-doi-org.brum.beds.ac.uk/10.3390/mi9120671.
Yildirimer L, Zhang Q, Kuang S, Cheung C-WJ, Chu KA, He Y, Yang M, Zhao X. Engineering three-dimensional microenvironments towards in vitro disease models of the central nervous system. Biofabrication. 2019. https://0-doi-org.brum.beds.ac.uk/10.1088/1758-5090/ab17aa.
Choi J-H, Cho H-Y, Choi J-W. Microdevice platform for in vitro nervous system and its disease model. Bioengineering (Basel). 2017. https://0-doi-org.brum.beds.ac.uk/10.3390/bioengineering4030077.
Zhang J, Wei X, Zeng R, Xu F, Li X. Stem cell culture and differentiation in microfluidic devices toward organ-on-a-chip. Future Sci OA. 2017;3:FSO187. https://0-doi-org.brum.beds.ac.uk/10.4155/fsoa-2016-0091.
Wnorowski A, Yang H, Wu JC. Progress, obstacles, and limitations in the use of stem cells in organ-on-a-chip models. Adv Drug Deliv Rev. 2019;140:3–11. https://0-doi-org.brum.beds.ac.uk/10.1016/j.addr.2018.06.001.
Pittenger MF. Multilineage potential of adult human mesenchymal stem cells. Science. 1999;284:143–7.
Wagner W, Ho AD. Mesenchymal stem cell preparations—comparing apples and oranges. Stem Cell Reviews. 2007;3:239–48. https://0-doi-org.brum.beds.ac.uk/10.1007/s12015-007-9001-1.
Thomson JA, Itskovitzeldor J, Shapiro SS, Waknitz MA, Swiergiel JJ, Marshall VS, Jones JM. Embryonic stem cell lines derived from human blastocysts. Science. 1998;282:1145.
Becker H, Hansen-Hagge T, Kurtz A, Mrowka R, Wölfl S, Gärtner C. Microfluidic devices for stem-cell cultivation, differentiation and toxicity testing. In: Gray BL, Becker H, editors. Microfluidics, BioMEMS, and medical microsystems XV. San Francisco: SPIE BiOS; 2017. p. 1006116.
Scott CW, Peters MF, Dragan YP. Human induced pluripotent stem cells and their use in drug discovery for toxicity testing. Toxicol Lett. 2013;219:49–58.
Narsinh KH, Jordan P, Wu JC. Comparison of human induced pluripotent and embryonic stem cells: fraternal or identical twins? Mol Ther. 2011;19:635.
Zhao M-T, Chen H, Liu Q, Shao N-Y, Sayed N, Wo H-T, Zhang JZ, Ong S-G, Liu C, Kim Y, et al. Molecular and functional resemblance of differentiated cells derived from isogenic human iPSCs and SCNT-derived ESCs. Proc Natl Acad Sci. 2017;114:E11111–20. https://0-doi-org.brum.beds.ac.uk/10.1073/pnas.1708991114.
Park D, Lim J, Park JY, Lee S-H. Concise review: stem cell microenvironment on a chip: current technologies for tissue engineering and stem cell biology. Stem Cells Transl Med. 2015;4:1352–68. https://0-doi-org.brum.beds.ac.uk/10.5966/sctm.2015-0095.
Qian T, Shusta EV, Palecek SP. Advances in microfluidic platforms for analyzing and regulating human pluripotent stem cells. Curr Opin Genet Dev. 2015;34:54–60. https://0-doi-org.brum.beds.ac.uk/10.1016/j.gde.2015.07.007.
This work was sponsored by the Shanghai Pujiang Program (17PJ1402800) and the National Natural Science Foundation of China (21775101).
Ethics approval and consent to participate
Consent for publication
The authors declare that they have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Wu, Q., Liu, J., Wang, X. et al. Organ-on-a-chip: recent breakthroughs and future prospects. BioMed Eng OnLine 19, 9 (2020). https://0-doi-org.brum.beds.ac.uk/10.1186/s12938-020-0752-0
- Microfluidic chip
- Physiological model
- Human organs
- Stem cell