- Open Access
Fluorescence multispectral imaging-based diagnostic system for atherosclerosis
BioMedical Engineering OnLine volume 15, Article number: 98 (2016)
Composition of atherosclerotic arterial walls is rich in lipids such as cholesterol, unlike normal arterial walls. In this study, we aimed to utilize this difference to diagnose atherosclerosis via multispectral fluorescence imaging, which allows for identification of fluorescence originating from the substance in the arterial wall.
The inner surface of extracted arteries (rabbit abdominal aorta, human coronary artery) was illuminated by 405 nm excitation light and multispectral fluorescence images were obtained. Pathological examination of human coronary artery samples were carried out and thickness of arteries were calculated by measuring combined media and intima thickness.
The fluorescence spectra in atherosclerotic sites were different from those in normal sites. Multiple regions of interest (ROI) were selected within each sample and a ratio between two fluorescence intensity differences (where each intensity difference is calculated between an identifier wavelength and a base wavelength) from each ROI was determined, allowing for discrimination of atherosclerotic sites. Fluorescence intensity and thickness of artery were found to be significantly correlated.
These results indicate that multispectral fluorescence imaging provides qualitative and quantitative evaluations of atherosclerosis and is therefore a viable method of diagnosing the disease.
Cardiovascular diseases (CVD) are the leading cause of death globally and killed an approximate 17.5 million people worldwide in 2012; making up three in every 10 deaths . Of this number, 7.4 million people died of ischemic heart disease. Atherosclerosis is a known precursor of ischemic heart disease and is defined as the thickening or stiffening of arteries with plaque—restricting blood flow from the heart to other organs and tissues. Over time, the progressive accumulation of plaque leads to rupture and thrombosis formation that can be life threatening. However, if detected early, atherosclerosis is reversible .
The use of intravascular imaging techniques currently utilized in diagnosing atherosclerosis can lead to procedure-related complications, long procedural times, and high expenditures . In addition, existing imaging modalities that are frequently used in clinical practice, such as intravascular ultrasound and coronary angiography, do not present a comprehensive assessment of the arterial plaque and subsequently progression of disease as they are not able to distinguish among specific cellular and molecular biomarkers of atherosclerotic lesion. Hence, development of new and/or improved intravascular imaging modalities that are able to produce anatomical images along with compositional information are vital in advancing the diagnostic field. In the present study, we proposed diagnosis of atherosclerosis using multispectral imaging technology.
Arterial wall in atherosclerosis contains high levels of lipids, mostly cholesterol. As certain lipids contain intrinsic fluorescence properties, this suggests the potential of diagnosing atherosclerosis based on biochemical properties. Previous research has indicated that collagen, elastin, ceroid, and tryptophan (all present in human arterial wall) possess specific fluorescence spectral features . Collagen and elastin are present as structural proteins in both normal and diseased arteries, where an increase in collagen has been noted in atherosclerotic arteries [5, 6]. Conversely, tryptophan and ceroid are only present in atherosclerotic lesion [7, 8]. These spectral changes in intrinsic tissue fluorescence can therefore be applied in diagnosis of atherosclerosis. Multispectral imaging is a technique of image processing and/or analysis often used in geographical analysis by satellites and also in remote sensing for detecting freshness of foods. This technology is also recently emerging as a diagnostic method in the field of medicine. The principle behind this method is such that when a sample is irradiated with excitation light, each point or pixel produces its corresponding reflection spectrum. In some cases, fluorescence spectrum is obtained. Therefore, spectral information can be obtained at each separate point (pixel) of the sample.
In this study, we hypothesized that multispectral fluorescence imaging can be used in detecting biochemical properties of arteries, which can subsequently be used in diagnosing atherosclerotic lesion.
Analysis of atherosclerotic aorta in rabbits
Four-week-old rabbits (Oryctolagus cuniculus) were administered with a 1 % cholesterol-containing feed for 27 weeks prior to aorta extraction. This resulted in atherosclerosis being developed in almost all the animals. For the purpose of this study, the abdominal aorta was extracted.
Isolated aorta was opened longitudinally along the ventral midline and gently rinsed blood with saline. The intimal side of the sample was irradiated with 405 nm excitation light. The multispectral fluorescence imaging system used had a spatial resolution of 1024 × 1024 pixels for a resulting fluorescence spectrum of approximately one million pixels, with each pixel having a fluorescence spectrum range of 450–800 nm with a resolution of 4 nm.
This study was conducted in accordance to the guidelines of the Institutional Review Board for the care of animals at the National Defense Medical College, Japan.
Application to human atherosclerotic coronary artery
Coronary arteries were extracted from human cadavers and were opened longitudinally and gently rinsed blood with saline. Analyses were carried out on blood vessels in the luminal surface (n = 9).
The protocol was approved by the ethics committee at National Defense Medical College, Tokorozawa.
Analysis of atherosclerosis using rabbit aorta
Using samples of rabbit abdominal aorta, comparison of the fluorescence spectrum was performed; the measurement of fluorescence intensity at 505 nm (FL505) revealed that the intensity of atherosclerotic sites decreased almost to a quarter than at normal sites (Fig. 1). This reduction in the fluorescence intensity correlated well with the presence of some chemical components such as excess collagen, tryptophan and ceroid, which quench the fluorescence radiation and are usually lacking in normal arterial walls [4–8]. Therefore, FL505 was considered to be a suitable indicator that identifies atherosclerotic changes in the walls of rabbit aorta. In contrast, fluorescence intensity at 615 nm (FL615) was found to be constant between normal and atherosclerotic sites. The lowest overall fluorescence value was also noted and marked as the “base” value. These three values at selected region of interests (ROIs) within each sample were recorded and used in the analysis of fluorescence spectra.
Thus introducing the analysis of fluorescence spectra the discrimination between normal and atherosclerotic sites in rabbit arteries was achieved. Atheromatous ratio (or AT ratio) is expressed by the following equation, Eq. 1:
The resulting AT ratio value was then used to produce reconstructed images, and the images were called “disease maps”. Reconstructed images by using AT ratio analysis clearly showed the difference between atherosclerotic and normal sites (Fig. 2).
Analysis of atherosclerosis using human coronary artery
Similar to the analysis of rabbit aorta, the samples of human coronary artery were processed to the spectral analysis. The fluorescence intensity at 526 nm (FL526) was markedly lower at atherosclerotic sites compared to normal sites and was thus used as an identifier (Fig. 3). On the other hand, the fluorescence intensity at 618 nm (FL618) was almost the same between atherosclerotic and normal coronary artery samples. In order to produce a corresponding “disease map” AT ratio values were then calculated as follows:
Similar to the rabbit samples, atherosclerotic sites were clearly distinguished in the reconstructed ratio image of human artery samples (Fig. 4).
Correlation between AT ratio and arterial thickness
Pathological examination of human coronary artery samples with hematoxylin-eosin (HE) staining revealed that the thickness of arterial wall was highly associated with the depth of atheromatous plaque (Fig. 5). Glass slides were digitally scanned to provide a high resolution digital image using a virtual slide system (OlyVIA, Olympus), and the thickness of arterial walls was calculated by the sum of the measurements of both tunica media and intima. Results of the pathological examination and fluorescence spectrum analysis suggested an inverted linear correlation between the thickness of atheromatous lesion and the fluorescence intensity at the key indicator wavelength (FL526). Therefore, their correlation was confirmed by plotting AT ratio derived from the spectral data over the corresponding thickness of arterial wall at multiple points in each sample (n = 66) (Additional file 1). Statistical analysis revealed their linear correlation with a correlation coefficient of r = 0.60 and a significance of p = 0.00020 (Fig. 6).
We further evaluated the diagnostic model by creating a receiver operating characteristic (ROC) curve using thickness of arterial wall and corresponding pathological judgment (normal or abnormal). As shown in Fig. 7, the resulting ROC curve indicated a highly accurate test with an area under curve of 0.82. Consequently, if an “abnormal” arterial wall judgment is set for AT ratio <2.1, our diagnostic tool will have a corresponding sensitivity of 0.78 and specificity of 0.68.
Current clinical methods for the detection of atherosclerotic lesions are limited and they often do not provide conclusive data, so the development of new technology is expected. The fluorescence imaging methodology used in this study may provide a quick and simple diagnostic way for both detection and quantification of atherosclerotic lesions. The application of multispectral fluorescent imaging to the analysis of atherosclerotic changes in arterial walls is based on the changes in biochemical composition of the luminal surface and vessel wall, which reflects the fluorescent status of the artery and provides information to interpret and validate the current status of the artery. This technology will be greatly helpful to assist the treatment of ischemic heart disease for atherosclerotic lesions.
We have demonstrated that multispectral fluorescence imaging is a useful and easy method for the detection of atherosclerotic sites. In the present study, the fluorescence peak at 505 nm in rabbit abdominal aorta and that at 526 nm in human coronary artery were key indicators to assess the extent of atherosclerosis. This indicator easily enables the discrimination of atherosclerotic tissues from normal arteries, and the depth and area of the atherosclerotic lesions can also be estimated quickly. As indicated in Table 1, candidate fluorophores that emit fluorescence at these wavelengths include collagen, elastin, FAD, etc. [9–17], all of which are important components of the normal arterial walls. The difference in peak wavelength between rabbit and human samples may be attributed to the difference in the ratio of collagen/elastin content in samples. Collagen content was probably higher in human coronary artery samples in this study since they were derived from aged patients while higher elastin content was anticipated in rabbit abdominal aorta because they were derived from 30-week-old rabbits (corresponding to 20–30 year old human). Additionally, the difference in peak wavelength may be related to the difference in pH values in the samples. Relatively small changes in pH are able to affect spectral characteristics of fluorescence, resulting in one fluorophore emitting fluorescence at different wavelengths .
Furthermore, this study using multispectral fluorescence imaging suggests the possibility of assessing of the qualitative evaluation as well as quantitative evaluation of atherosclerosis. In a study conducted to investigate the association between stroke and arterial thickness, it was reported that at arterial (intima-media) thickness of 0.53 ± 0.03 and 0.71 ± 0.02 mm, risk of ischemic stroke doubled and quadrupled respectively (based on control of 0.39 ± 0.07 mm) . Correspondingly, the atherosclerosis risk in communities (ARIC) Study indicated that the relative risk of ischemic stroke is the lowest and highest at arterial thickness of <0.59 and ≥0.70 mm respectively . Several other studies have also shown similar results [21, 22]. Based on the fluorescence data from the samples, we were able to calculate AT ratio (that was plotted against corresponding measured thickness of arteries) and produced a regression model for its estimation, which successfully showed positive correlation between the estimation of the relative thickness of the artery and the progression status of the atherosclerotic lesion (Fig. 8). The ability of this system to effectively measure thickness of artery and subsequently progression of the disease will be valuable when translated to an endoscope-based system for in vivo diagnosis.
We have demonstrated that multispectral fluorescence imaging is a new method of detecting atherosclerosis sites; it is useful for both quantitative and qualitative evaluation of the disease. With further improvements, we believe that the application of this technology to an endoscope-based diagnostic system will be beneficial in constructing a new intravascular diagnostic tool for the in vivo detection of atherosclerotic lesions.
region of interest
receiver operating characteristic
flavin adenine dinucleotide
atherosclerosis risk in communities
World Health Organization: global status report on noncommunicable diseases. 2012. http://www.who.int. Accessed 7 Dec 2014.
Gotto AM Jr. Is atherosclerosis reversible? J Am Diet Assoc. 1979;74(5):551–7.
Raman G, Yu W, Ip S, Salvi P, Kong LWC, Iovin RC, et al. Intravascular diagnostic procedures and imaging techniques versus angiography alone in coronary artery stenting: comparative effectiveness review. In: Comparative effectiveness review No. 104. Agency for healthcare research and quality. 2013. http://www.effectivehealthcare.ahrq.gov/ehc/products/299/1411/Coronary-Artery-Stenting-Executive-130226.pdf. Accessed 13 Aug 2015.
Georgakoudi I, Motz JT, Backman V, Angheloiu G, Haka AS, Müller M, et al. Quantitative characterization of biological tissue using optical spectroscopy. In: Vo-Dinh T, editor. Biomedical photonics handbook. Boca Raton: CRC Press; 2003. p. 1–33.
McCullagh KA, Balian G. Collagen characterization and cell transformation in human atherosclerosis. Nature. 1975;258:73–5.
Katsuda S, Kaji T. Atherosclerosis and extracellular matrix. J Atheroscler Thromb. 2003;10(5):267–74.
Baraga JJ, Rava RP, Fitzmaurice M, Tong LL, Taroni P, Kittrell C, et al. Characterization of the fluorescent morphological structures in human arterial wall using ultraviolet-excited microspectrofluorimetry. Atherosclerosis. 1991;88(1):1–14.
Marcu L, Fishbein MC, Maarek JJ, Grundfest WS. Discrimination of human coronary artery atherosclerotic lipid-rich lesions by time-resolved laser-induced fluorescence spectroscopy. Arterioscler Thromb Vasc Biol. 2001;21:1244–50.
Ramanajum N. Fluorescence spectroscopy of neoplastic and non-neoplastic tissues. Neoplasia. 2000;2(1–2):89–117.
Richards-Kortum R, Sevick-Muraca E. Quantitative optical spectroscopy for tissue diagnosis. Annu Rev Phys Chem. 1996;47:555–606.
Kollias N, Zonios G, Stamatas GN. Fluorescence spectroscopy of skin. Vib Spectrosc. 2002;28:17–23.
Vo-Dinh T, Cullum BM. Fluorescence spectroscopy for biomedical diagnostics. In: Vo-Dinh T, editor. Biomedical photonics handbook. 2nd ed. Boca Raton: CRC Press; 2014. p. 485–530.
Zheng W, Lau W, Cheng C, Soo KC, Olivo M. Optimal excitation-emission wavelengths for autofluorescence diagnosis of bladder tumors. Int J Cancer. 2003;104:477–81.
Bachmann L, Zezell DM, Ribeiro ADC, Gomes L, Ito AS. Fluorescence spectroscopy of biological tissues—a review. Appl Spectrosc Rev. 2007;41(6):575–90.
Wu Y, Qu J. Autofluorescence spectroscopy of epithelial tissues. J Biomed Opt. 2006;11(5):054023.
Andersson-Engels S, Gustafson A, Johansson J, Stenram U, Svanberg K, Svanberg S. Investigation of possible fluorophores in human atherosclerotic plaque. Lasers Life Sci. 1992;5(1–2):1–11.
Kandori H, Sasabe H, Mimuro M. Direct determination of a lifetime of the S2 state of β-carotene by femtosecond time-resolved fluorescence spectroscopy. J Am Chem Soc. 1994;116:2671–2.
PerkinElmer. An introduction to fluorescence spectroscopy. Waltham: PerkinElmer, Inc.; 2000.
Chuang S, Bai C, Chen J, Yeh W, Chen H, Chiu H, et al. Common carotid end-diastolic velocity and intima-media thickness jointly predict ischemic stroke in Taiwan. Stroke. 2011;42:1338–44.
Chambless LE, Heiss G, Folsom AR, Rosamund W, Szklo M, Sharrett AR, et al. Association of coronary heart disease incidence with carotid arterial wall thickness and major risk factors: the atherosclerosis risk in communities (ARIC) study, 1987–1993. Am J Epidemiol. 1997;146:483–94.
Kitamura A, Iso H, Imano H, Ohira T, Okada T, Sato S, et al. Carotid intima-media thickness and plaque characteristics as a risk factor for stroke in Japanese elderly men. Stroke. 2004;35:2788–94.
Xie W, Liang L, Zhao L, Shi P, Yang Y, Xie G, et al. Combination of carotid intima-media thickness and plaque for better predicting risk of ischaemic cardiovascular events. Heart. 2011;97:1326–31.
CH participated in conceiving and designing the experiment, performed the experiments, contributed to data analysis and drafted the manuscript. TH participated in conceiving and designing the experiment and performed the experiments. HT performed the experiments and contributed to data analysis. AU performed the experiments and contributed to data analysis. KH contributed to data analysis. KI contributed to data analysis. KN performed the experiments and contributed to data analysis. AAi contributed to data analysis. NZ contributed to data analysis. AAm contributed reagents/materials/analysis tools. NS contributed reagents/materials/analysis tools and contributed to manuscript preparation. YM participated in conceiving and designing the experiment, performed the experiment, contributed reagents/materials/analysis tools and contributed to manuscript preparation. All authors read and approved the final manuscript.
The authors declare that they have no competing interests.
Availability of data and materials
The dataset supporting the conclusions of this article is included within Additional file 1.
Consent for publication
Any individual persons data were not applicable.
This study was supported in part of JSPS (#26560267, Y. Morimoto), JST A-step feasibility study program (AS251Z00043P, Y. Morimoto), and Nakatani Foundation for Advancement of Measuring Technologies in Biomedical Engineering (Y. Morimoto), SENSHIN Medical Research Foundation (Y. Morimoto) and Mitsui Life Social Welfare Foundation (Y. Morimoto). The authors also acknowledge the support of the Ministry of Education, Culture, Sport, Science and Technology (MEXT) Malaysia for its financial support through a Strategic Research Foundation Grant for Private Universities whereby this research is under Universiti Teknologi Malaysia (UTM) Matching Grant (Q.K130000.3043.00M43) supported by Malaysia-Japan International Institute of Technology (MJIIT), UTM.
About this article
Cite this article
Ho, C.S.L., Horiuchi, T., Taniguchi, H. et al. Fluorescence multispectral imaging-based diagnostic system for atherosclerosis. BioMed Eng OnLine 15, 98 (2016). https://0-doi-org.brum.beds.ac.uk/10.1186/s12938-016-0220-z
- Multispectral fluorescence imaging
- Abdominal aorta
- Coronary artery