Skip to main content
Figure 1 | BioMedical Engineering OnLine

Figure 1

From: Investigating the possible effect of electrode support structure on motion artifact in wearable bioelectric signal monitoring

Figure 1

System overview of the motion artifact creation and assessment system, and the servo rotation pattern used to create motion at the electrode. a Presents the system overview and for simplicity, the electrode locations are not shown. b Translation of servo rotation into lateral electrode movement. a and b are modified from [14] and the applied motion is depicted by the two-sided arrows. c Rotation of the servo in degrees. d Translation of this pattern into lateral electrode motion in x- and y-axes.

Back to article page