- Open Access
Facilitating arrhythmia simulation: the method of quantitative cellular automata modeling and parallel running
BioMedical Engineering OnLine volume 3, Article number: 29 (2004)
Many arrhythmias are triggered by abnormal electrical activity at the ionic channel and cell level, and then evolve spatio-temporally within the heart. To understand arrhythmias better and to diagnose them more precisely by their ECG waveforms, a whole-heart model is required to explore the association between the massively parallel activities at the channel/cell level and the integrative electrophysiological phenomena at organ level.
We have developed a method to build large-scale electrophysiological models by using extended cellular automata, and to run such models on a cluster of shared memory machines. We describe here the method, including the extension of a language-based cellular automaton to implement quantitative computing, the building of a whole-heart model with Visible Human Project data, the parallelization of the model on a cluster of shared memory computers with OpenMP and MPI hybrid programming, and a simulation algorithm that links cellular activity with the ECG.
We demonstrate that electrical activities at channel, cell, and organ levels can be traced and captured conveniently in our extended cellular automaton system. Examples of some ECG waveforms simulated with a 2-D slice are given to support the ECG simulation algorithm. A performance evaluation of the 3-D model on a four-node cluster is also given.
Quantitative multicellular modeling with extended cellular automata is a highly efficient and widely applicable method to weave experimental data at different levels into computational models. This process can be used to investigate complex and collective biological activities that can be described neither by their governing differentiation equations nor by discrete parallel computation. Transparent cluster computing is a convenient and effective method to make time-consuming simulation feasible. Arrhythmias, as a typical case, can be effectively simulated with the methods described.
Arrhythmias, a significant direct cause of death in heart diseases, are emergent and evolvable events that come with little prior warnings and allow limited response time . Although ECG waveforms – the mapping of body surface potentials of cardiac cells – have routinely been used to diagnose arrhythmias, as integrated signals they tell us little about what happen at cell and ionic channel levels. They therefore are only marginally useful in guiding the clinical use of anti-arrhythmic drugs to treat disturbed cardioelectrical activity at cell and channel levels. Many of such drugs used today are ionic channel blocking agents .
To overcome the inherent limitations of clinical investigation, computational modeling and simulation has been widely recognized as a valuable alternative approach. Traditionally, cardiac modeling has centered on ECG simulation. Using the finite element method (FEM), the virtual heart and whole chest are partitioned into numerous elements representing a group of cells. The ECG is then simulated, based on computing the body surface potential of each cardiac element [3–5]. Basically, this method does not concentrate on cellular electrophysiological issues at the channel level, and thus fails to precisely associate macro level phenomena (ECG waveforms) with micro level activities and to make use of the considerable knowledge of cellular electrophysiology accumulated over the past decades. To improve the understanding of arrhythmias and to find effective perturbations, electrophysiological modeling using membrane equations is required so that mechanisms of arrhythmias at cell, channel, and even molecular levels can be investigated [6–8].
To study arrhythmias using a large-scale realistic electrophysiological model, two issues need to be effectively resolved: model building and operation. Though the widespread paradigm of modeling with C or C++ remains a workable choice, the huge number of cardiac cells in a realistic three-dimensional (3-D) whole-heart model and the numerous modifications of the model to simulate various pathological conditions, make more desirable efficient modeling based on transparent parallel computing. To build and run a model with parallel computing technologies, two strategies were separately developed in recent years. To provide transparent and parallel descriptions, cellular automata were used [9–11, 50]; for efficient execution, distributed computing was adopted [12, 13]. Yet, each strategy alone is not sufficient for the successful simulation of arrhythmias. On the one hand cardiac models built with traditional cellular automata are qualitative, and thus do not use the Hodgkin-Huxley (HH) action potential equations to describe channel electrical activity. Consequently, many arrhythmias, such as those triggered by early-after-depolarization (EAD) and delayed-after-depolarization (DAD), can not be simulated. On the other hand, physical parallelism on parallel computers is also not fully exploited in these cellular automata models. MPI, the programming protocol for distributed-memory multiprocessors (DMP), and OpenMP, the programming protocol for shared-memory multiprocessors (SMP), are not used [14, 15]. Partly because of these two issues, arrhythmia simulations with a realistic whole-heart electrophysiological model have not been fruitfully conducted.
There is compelling evidence that cardiomyocytes are not arranged in a uniformly connected continuum, as has often been assumed and simulated in the past. Along with nonlinear ionic channel electrical activity, discontinuous electrical propagation is another key feature of cardioelectrical activity . The former demands a precise membrane equation based description; the latter requires a gap junction based discrete model. To efficiently build heterogeneous models containing different types of cardiomyocytes described by different membrane equation models and connected through different gap junctions remains a major challenge. In the present study, we propose a method using an extended, quantitative cellular automaton to build a discrete whole heart model with the data of the Visible Human Project (VHP) male cadaver . An ECG simulation algorithm based on the membrane potential of each and every cell is designed and validated in a 2-D model built with the same method. Moreover, we combine cellular automata modeling with distributed parallel computing to realize efficient and affordable simulation. The parallel numerical solutions of the HH equations within a large number of cardiac cells are executed in parallel on a cluster with hybrid MPI and OpenMP programming. The parallel programming does not have to be manually coded in models built with the extended cellular automaton, because the modified compiler of the cellular automaton can automatically parallelize the codes, making parallelism fully transparent. The aim of this paper is to introduce the method and the whole-heart electrophysiological model. Results of performance evaluation on a four-node cluster are given. Based on this work, we conclude that quantitative modeling using extended and cluster computing enabled cellular automata is feasible and efficient, seamlessly binding conceptual and physical parallel computation. This method is suitable for a variety of computational intensive, tissue level modeling and simulation.
Cellular automata style quantitative computing
Cellular automata were first introduced by John von Neumann and Stanislaw Ulam in the 1940s, and gradually used to solve a wide range of problems, including multicellular biological modeling in which a natural correspondence between each automaton cell and each biological cell is assumed [18–21]. Simple local interaction producing complex global behavior is common to a variety of natural phenomena, including cardioelectrical activity. Though traditionally cellular automata are regarded as discrete parallel systems, new functions can be obtained with non-standard implementations [22, 23]. For language-based cellular automata, a program encoded in a language instead of a rule is shared by all cells and describes the behavior of each cell. A compiler translates the cell program into executable files. To enhance the portability of the language, a two-step compilation is usually adopted, with C/C++ files being the intermediate codes, allowing the extension of such cellular automata systems.
Cellular is a cellular automata system based on the language Cellang , whose cell program comprises three parts: constant declarations, a cell declaration, and statements. The cell declaration defines a set of fields to store states of each cell between successive steps of computation. The cell array is described in a separate data file, whose output is piped to the cell program to provide the value of fields in each cell so as to enable computation. A predefined unchangeable variable time synchronizes the running of all cells. By conventions, in cellular automata computation quantitative computing is not fully supported and function call is not allowed. To overcome this inherent inadequacy of Cellang in quantitative computing and enable it to solve HH type membrane equations, we have added new language facilities, including the floating-point data type and the mathematical functions provided in the C libraries. Thus, Cellang is able to encode numerical solutions of the HH equations (Figure 1). A built-in function position() is also added to specify the global coordinates of the currently running cell. This function, in combination with the if-then statement, allows position-and time-dependent runtime perturbations to any cells, a function valuable for arrhythmia simulation. Viewing facilities are also extended to monitor and display simulation of electrical activitys at channel, cell, and organ level.
Running a model may be no easier than building it. The large number of cells, the small time step Δt and the long running time for arrhythmia simulation make it impractical to run a whole heart model on any low-end computer. Since large-scale SMP machines are extremely expensive, the prevailing parallel computing platforms are clusters of small-scale SMP or DMP, and the protocols of programming in Fortran, C, and C++ on such computers are OpenMP and MPI. First, an endless while loop is used to realize iterative computation. Second, since for an n-dimensional model each field in the cell program is translated into an n-dimensional data array in the intermediate C program, within the while loop n successive for loops are employed to traverse the n dimensional cell space. Only the codes within the for loops, which are statements in the cell program, need to be parallelized. Instead of defining one data array with an offset for each field in the original Cellular system, we use two data arrays in a flip-flop manner to support parallel write operation. OpenMP provides a group of directives to be inserted into the C program to tell the compiler the region to be executed in parallel. Such directives appear before the for loops to dispatch the outermost for loop into a group of threads, whose number is set dynamically according to the available CPUs. The simulation of cellular activity is thus implicitly parallelized in a shared memory space. To parallelize a Cellang program on a platform with distributed memory, explicit cell space decomposition is inevitable. Every data array is equally divided into several subsets located in distributed memory bodies, and computed by autonomous computing nodes that communicate each other through MPI. Since a cell needs to access its neighboring cells over the maximal radius m to compute transjunctional currents, each subset should enclose m extra layers of cells on each side to ensure that cells at the boundary layer(s) can access correct neighbors that are located in the outermost m layers of the two neighboring subsets, respectively. Field values of cells in these extra layers should be swapped between neighboring subsets after each round of computation to ensure that cells access updated data. Such data exchange is the major factor for the excessive time needed by cellular automata models running on distributed memory platforms. If cells have many fields, the time spent on such operations may even offset the benefits of parallelism.
To reach the maximal flexibility and portability for MPI-parallelization, a master-slave program structure is adopted (Figure 2). The number of slaves is set in the compilation command with an argument. The master is responsible for:
Reading data from the data file into the cell space and dispatching the cell space at time step 0;
collecting the value of a selected field in each cell from all slaves and displaying them at each time step;
updating the variable time and sending its new value to every slave to trigger the next round of computation;
doing some global, non-cellular automata style computing such as ECG simulation;
Each slave process is responsible for:
receiving a subset of the cell space at time 0;
exchanging the boundary layers with neighboring slaves at each time step;
executing the cell program of cells in its subset at each time step;
sending the value of a selected field to the master at each time step for display;
receiving the new value of time at each time step.
Finally, to run the model on a cluster of SMP nodes, a two-tier parallelism – a coarse-grained setting among nodes and a fine-grained setting within nodes – is applied. The hybrid programming is straightforward – insert OpenMP directives into the master and slaves, as in the case of pure OpenMP programming to spawn a group of threads within each node to implement cell level parallelism. Due to the stereotyped appearance of these codes, we let the compiler generate them each time we compile a model, leaving the number of slaves and threads within each slave as command line arguments, so as to make parallel computation entirely transparent to users.
Construction of the anatomical model of the heart
The anatomical model, which is a data file describing the distribution of the cell array and the initial value of fields in each cell, is independent of the cell program. The data file can be manually edited or generated by a program coded in C/C++. Due to the correspondence between each automaton cell and each biological cell, the building of the anatomical model is straightforward, even if a model has an irregular structure and a heterogeneous cell population. Usually, the Moore neighborhood is adopted, as is the case in our model.
The data used to build the 3-D heart model are the axial images of the Visible Human Project (VHP) digital male cadaver , which contains about 125 thoracic slices at a 1 mm interval. Using an image processing program we developed, we enter a 128 × 128 coordinate system on each slice and use a computer mouse to mark the cells of different tissue with different colors (Figure 3). This process digitalizes each slice into a data file that reports the coordinates and type of each cell. The current heart model contains six kinds of cardiac tissues: sinoatrial node (SAN), atrioventricular node (AVN), atrium (AT), ventricle (VT), and trunk conduction bundle in the atrium (CBA) and in the ventricle (CBV). The distribution of trunk conduction bundles in each slice is determined by clinical experts, but the terminal distribution of the Purkinje fibers is generated by an algorithm at runtime. After processing all 125 slices, we use a program to merge the generated 2-D data files into a 3-D data file, which constitutes the anatomical model of the heart that occupies about 280,000 cells in the 128 × 128 × 128 cellular automata cell space. We also build an illustrative 2-D model containing the same kinds of cells and the same action potential models to evaluate the ECG simulation algorithms (Figure 6). The simulated normal and some abnormal ECG waveforms support the validity of the algorithm (Figure 7).
Heterogeneity, anisotropy and inhomogeneity
The heterogeneity of a model is described in two ways. First, a specific field type, indicating cell type, is defined in the cell program, but whose value is initially stipulated in the anatomical model when we process tissue slices, such as:
[x, y, z] = type, ......
x, y, and z are the coordinates. Values of other fields can be defined or not in the data file. With a nested if-then statement on the value of type, the cell program is divided into several parts, each being executed by cells of the specific type. Second, type can be modified at runtime to simulate pathological changes. After a cell type is changed, its program and therefore its behavior also change.
In a tissue or organ, aside from heterogeneity, cells often show anisotropy and inhomogeneity that cannot be conveniently described while processing the raw data. To describe these two properties needs a bit of pattern formation programming , an interesting and challenging issue of biological modeling with cellular automata. In building the whole-heart model, the first relevant issue is cells at different layers in cardiac walls have different electrical properties [16, 25]. To express this inhomogeneity, we developed a resolution-and dimension-independent algorithm to stratify cardiac walls into layers at the initial stage of runtime. The algorithm is comprised of three steps, and is run by all cells:
Let the layer number of SAN cells (at least one SAN cell is on the epicardium) be 0 and the layer number of AVN cells (at least one AVN cell is on the endocardium) be 50.
If the current cell is neither a ventricular nor an atrial cell, then: if it connects to a cell whose layer is 0, its layer is 0; if it connects to a cell whose layer is 50, its layer is 50.
If the current cell is a ventricular or an atrial cell, then: visit all its neighboring cells and find out their minimal layer number, Min. The layer of this cell is Min+1.
A slice of the stratified 3-D model and of the stratified 2-D model is shown in Figure 6. After stratification, the layer number of each ventricular cell is added to its HH equations as a special parameter to control and adjust its action potential duration (we do not use the layer number of atrial cells). This procedure ensures that epicardial cells have shorter action potential duration than endocardial cells, and the epicardium-to-endocardium repolarization is naturally and faithfully established. By assigning a large layer number to cells in the middle layers of the ventricular walls, an unusually long action potential duration is created, and the specific electrical property of M cells can be naturally simulated .
The slices of the digital cadaver do not provide any useful information on the distribution of terminal Purkinje fibers. Even if we know that most of them are located in the subendocardium, it is impractical to make a slice-by-slice manual description. Based on the stratified cardiac walls, this issue can be easily solved by using a lateral inhibition algorithm applied to cells on the ventricle subendocardium to generate a mesh-like Purkinje network. On completion of running the algorithm, some of the cell types are changed from ventricular cell to Purkinje cell.
The more difficult engineering issue is the fine structure of cardiac cells and conduction fibers. Simulation with the 2-D model demonstrates that, even if the HH action potential model of Purkinje cells produces a very fast upstroke, which means a quick transjunctional conduction, yet a one-cell by one-cell conduction can never give normal propagation profiles as observed in Durrer's experiment, due to a too long transjunctional delay . Nevertheless, our simulation shows that the rapid conduction in conduction fibers can be implemented by n-by-n cell communication among automaton cells of conduction fibers without physically building the fiber structure; n = 4 gives very satisfactory simulation results. Again, we propose that by using a pattern formation algorithm the physical construction of fiber structures is also feasible. In this scenario, a fiber is assembled by n successive automaton cells sharing the same, unique identity number, among which there is no conduction delay. Currently, with the 2-D model we find that even if letting each automaton cell stand for a discrete ventricular cell, the model works quite well in ECG simulation.
Computation within and between cells
Each automaton cell is a computing unit for action potential and ECG simulation. The electrical activity of each automaton cell of a specific cell type is described by the corresponding HH type action potential model. Five action potential models are employed to simulate activities of different cardiac cells (The cells of trunk conduction fiber in atriuma and ventricles use the action potential model of the Purkinje cell) [27–31]. Since the models are based on experimental data from different animal species, parameters of K+ channels are slightly changed to produce action potential duration of human cardiac cells. Time constraints are the only reason for us to adopt early published, simpler action potential models. In the given simulations, all action potential models are solved using explicit Euler integration with a time step, Δt, of 0.01 ms . An asynchronous adaptive time step method has also been developed to speed up simulation . Electrical activities at channel (Figure 4), cell (Figure 5), and organ (Figures 6, and 7) levels are monitored and captured at runtime.
Each automaton cell in the 3-D model has 26 neighbors, linked by gap junctions. When a cell depolarizes, driven by the potential difference between it and its neighboring cells, transjunctional currents generate and propagate to neighbors through gap junctions. Simulations with the 2-D model show that the simple static gap junction model, in which the resistance of the gap junction is a constant and the transjunctional current follows Ohm's law, works quite well. The dynamic gap junction models, in which the resistance of gap junction changes in a nonlinear manner with membrane potential, will significantly increase computational time [33, 34] and create an extra burden for large-scale modeling.
Values of gap junction resistance between different cells and in different directions are initially set according to available experimental data, and then tuned via simulation according to Durrer's experimental observations . Excitation conduction between cells of the same layer follows an end-to-end propagation, and between cells of different layers is a side-to-side process. Parameters are also adjusted to fix the ratio of side-to-side conduction speed vs. end-to-end conduction speed to be one-third in ventricular cells and one-tenth in atrial cells . Gap junction resistance can be modified at runtime to examine its effect on excitation propagation. For each cell in each round of computation, before solving the HH equations, the transmembrane potentials of all neighboring cells are checked and the transjunctional currents computed and summed to get the stimulating current, I stim , that the cell receives. The direction and speed of electrical propagation within the heart are jointly controlled by: (1) the stratification of the ventricular walls, (2) the speed of end-to-end and side-to-side conduction, (3) the ratio of end-to-end conduction speed to side-to-side conduction speed, and (4) the distribution of the trunk conduction bundle.
Description of pathological activity
In the cardiac model built with the extended cellular automata, abnormal electrical activities are grouped into four classes. The first class is based on anatomical defects in the heart that can be described by changing the type of some cells, either in the anatomical model or in the cell program. The Wolff-Parkinson-White syndrome caused by atrium-ventricle bypasses is a representative case. The second class is resulted from aberrant environments, especially abnormal ionic concentration (e.g. hyperkalemia) which significantly influences action potential. Abnormality of transjunctional conduction constitutes the third class, and the fourth class is is comprised of anomalous dynamics of cellular electrical activity itself. Changes in the HH equations can simulate these aberrations. In most cases, pathological changes affect more than one aspect. For example, in addition to providing an abnormal cell environment, ischemia also results in changed cellular electrical activity and altered gap junction resistance. To simulate the effect of ischemia, a special field blood, with normal value 1.0 is defined in the cell program, and introduced as an extra parameter in action potential and in gap junction models. To multiply the conductivity of the gap junction by an abnormal value of blood (e.g., blood 0.7) can simulate a lowered gap junction conduction speed. A small value for blood, when inserted into the equation computing Ca++ current, affects the generation of the action potential. Dynamically modified blood can naturally simulate progressive ischemia (Figure 5 and Figure 7) [36, 37].
Combining these factors, a variety of arrhythmias can be simulated. For example, by partially or completely blocking the activity of cells, or the conduction of gap junctions at specific locations, various conduction blocks such as AV (atrium-ventricle) block, LBBB (left bundle branch block) and RBBB (right bundle branch block) can be conveniently simulated. Many rapid arrhythmias are triggered by successive ectopic beats. Such abnormal beats can be produced in the model by providing cells at specific locations with extra stimulation or by changing them from atrial/ventricular to SAN cells. For abnormal propagations such as long QT syndrome, caused by the extra long refractory period of M cells, we can adjust, either dynamically or statically, the layer number of cells at the middle layers of the ventricular walls. Complex spatiotemporal patterns of arrhythmias are formed through discrete cell-cell communication. By these means, arrhythmic electrical activities can be simulated in flexible ways, different from those models created by cable equations or other partial differential equations (PDE).
ECG simulation by computing field potential of every cell
Linking ECG simulation directly with cellular and channel electrical activity is crucial for the understanding and treatment of arrhythmias. Since each automaton cell in our model is a computing unit, a cell level ECG simulation algorithm is developed to compute each cell's field point potential. The algorithm, implemented as a backend function coded in C language, shows strengths, because such cell level simulation builds a link between the action potentials of cells and the ECG waveforms. The limitation here is that this heart model does not include the chest, so that the contribution of thoracic tissues to body surface potential is much simplified. The model reads the membrane potential of every automaton cell and computes its field potentials at the standard lead locations.
Several assumptions are made in the computations on account of established physical laws. (a) Each (automaton) cell has a spherical shape. Thus, the transmembrane potential, V m , is uniform on all parts of the cell membrane, except at gap junctions. (b) Gap junctions occupy the same area and are symmetrically distributed on each cell. (c) The distance from cell to field point is long enough so that the two solid angles subtended by the positive and negative sides of a cell membrane to a field point are equal. (d) Dielectric effects on field potential are neglected. σ media is the average conductivity of the 1-D tissues between a source cell and a field point; σe the conductivity of the intercellular matrix; and σ i the conductivity of the intracellular cytoplasm. (e) For any neighboring cells, j and k, σje = σke, σji = σki and φje = φke, φe is the potential in intercellular space. For convenience, we present the algorithm for the 2-D model here; the 3-D case is similar. The equation computing the field potential of an isolated cell at field point P is 
σi φi - σe φe is the double layer strength of the cell membrane. When there is no propagation on the cell membrane, the field potential is zero. If the cell connects with eight adjacent cells, equation (1) becomes:
Here, σi φi - σji φji is the double layer strength of the gap junction between the cell and its j th neighbor. The transjunctional potential difference between the two cells then becomes:
φi - φji = φi - φe + φe - φji = φi - φe + φje - φji = Vm - Vjm (3)
S1 to S8 are areas of the eight gap junctions; Ω1 to Ω8 are solid angles subtended by them; and S0 denotes the remaining part of the cell membrane (Figure 8). Let the membrane area positive to P be SB and the area negative to P be SA. If: (a) SB = SA, (b) the same and even number gap junctions distribute symmetrically on SB and SA, and (c) all gap junctions have an equal area, then it can be proved that:
Here, Σ KA is the sum of areas of gap junctions on SA, and Σ KB is the sum of areas on SB. In this circumstance, the first term in equation (2) is zero, and only the second term makes a contribution to field potential. The equation now becomes:
Considering all Sj (j = 1...8) to be equal, and cos α1 = cos α5 = cos 90° = 0, we have:
is a constant that affects only the baseline, but not the shape of the ECG waveform. The field potential at point P, generated by the whole heart, is the superposition of all cells' contributions:
Here, n is the number of automaton cells, and φj(P) is computed with equation (5).
Due to the time needed for the numerical solution of massive HH equations, the computing of σmedia R2 has to be much simplified, as described in equation (7), where σmedia_i is the conductivity of tissue i, and Ri is the length of tissue i on the line between the source cell and the field point P.
As noted above, both the boundary effect and order of dielectric distribution are neglected. The 2-D (3-D) boundary between two tissues is treated as a 1-D boundary, and the ordered dielectric distribution is treated as an unordered distribution. Because of the huge number of cardiac cells and various possible field points on body surface, epicardium, endocardium and cardiac cavities, it is impossible to deal with numerous situations of boundary conditions between cells and field points. The method we adopt here is to make a runtime traverse from the source cell to the field point and meanwhile check the conductivity of each tissue and determine the 1-D space it occupies. The scaled distance is 1.0 between two perpendicular-connected cells, and 1.414 between two oblique-connected cells. Although the electrical property of non-cardiac tissues is much simplified, the electrical property of cardiac cells is intensively considered. Cardiac cells under different conditions have different conductivity . It is σDepo = 0.4 mhos/m in depolarization, σRepo = 0.25 mhos/m in repolarization, σRest = 0.2 mhos/m in resting state, σInfarct = 0.1 mhos/m in acute infarcted area, and σIschemia = 0.16 mhos/m in ischemic area. We let σBlood = 0.6 and σChest = 0.1 be the average conductivity of tissues in chest [40, 41]. We find ECG simulation is not clearly impaired by this simplified dielectric description, but benefits from the intensified cardiac tissue description.
Factors that influence performance of the parallelized cellular automata model
For the physically parallelized whole-heart electrophysiological model built with the extended cellular automata, several factors impair the simulation efficiency on a cluster of SMP.
The first difficulty is the graphic display of the simulation. The main display window, as the critical resource in the parallelized program, can only be sequentially accessed by the cells. Thus, to display the updated state of all cells leads to a significant decrease of running speed. We mitigate this problem by displaying the cell state every 20 or even 50 steps, instead of every single step. The second problem is the overhead of communication among slaves located on different nodes. The time cost of communication, spent on the exchange of boundary sheets between neighboring slaves in each round, rises with the increase of slave number. An extreme case for a 128 × 128 × 128 model is that there are 128 nodes, and each slave deals with just one sheet, requiring every sheet to be exchanged in each round. The physical link between nodes also significantly affects performance. An additional limitation is that the overhead of fork/join operations in the OpenMP parallelized program degrades performance, although not very significantly. The OpenMP directive parallel can be inserted either before the endless while loop, or more simply, before the three for loops. If it is inserted before the for loops, the fork and join operations, which create and delete threads and allocate and collect memory for temporary variables in each thread, will be repeatedly executed in each round. The preferable way, which eliminates this unnecessary expenditure, is to insert the directive omp parallel before the while loop, and the directive omp for before the for loops. Between the omp parallel and the omp for,omp master is used to limit parallelism to only the cell program part. Finally, load balance becomes a limitation when a model has an irregular and/or heterogeneous structure. The heart, with four chambers and an uneven shape, is a typical case. Usually, on a cluster consisting of m identical nodes each containing n CPUs, a program is evenly dispatched to distribute the cell space across all nodes. We find that using this strategy, the 3-D heart model cannot reach the best load balance and performance because different nodes deal with different numbers of cardiac cells. Furthermore, even if each node contains the same number of cardiac cells, since different cells run different action potential models, the burden of computation remains unequal. Only a solid cubic model with homogeneous cells occupying the full cell space can ensure a best performance. Thus, if a model needs to run many simulations, an important issue is to find the best cell space partition.
Evaluation of the 3-D cardiac model
Pilot runs with the 3-D model have been made on a 4-node SUN computer cluster. The head node has eight UltraSparc CPUs, and the other nodes each have four identical CPUs. Five processes, 1 master and 4 slaves, are created at each run. The master and a slave are assigned to the head node, and each remaining slave is assigned to a node. Within each slave, four threads are created using the OpenMP parallel directive. Figure 9 gives the performance results for an even partition strategy. With this partition, due to the irregular structure of the heart and the heterogeneity of cardiac cells, the combination of 4 slaves-4 threads does not give the best performance. The 4 slaves- 2 threads setting behaves better because the overall cost is lower. . However, when the whole cell space is occupied by ventricular cells, the 4 slaves-4 threads version provides the best performance, as predicted.
Arrhythmias are a group of complex syndromes not well understood. Many difficult issues exist when investigating arrhythmias through computational modeling. We cover here only a few relating to model building and running.
We adopt early published action potential models in the current 3-D model because they are simpler and more computationally affordable. In the first version of the Luo-Rudy model , there are six ionic channels, and the fluctuation of ionic concentration is not described. In the second version, there are many more channels, and the dynamic ion concentrations are described by another large group of ODEs . It is straightforward to upgrade the cardiac model by replacing old action potential modelswith new ones. However, action potential models are not the whole story for a cardiac model. One has to make a compromise between the complexity of action potential models and the resolution of the cardiac model, because the computational burden also is due to the latter. Pollard et al.  in 1993 reported a cardiac model containing 400,000 computing nodes, but a much simplified action potential model was used . This strategy was also adopted by other modelers . We argue that full action potential models are important for modeling and understanding arrhythmias, especially those triggered by abnormal ionic electrical activities. However, to simulate more complex spatio-temporal cardioelectrical activities such as spiral waves in fibrillation, the current resolution of the model is undoubtedly insufficient. Technically, it is not difficult to adopt a higher resolution with more precise data, such as the digital female cadaver slices, which have an interval of 0.33 mm . To double the resolution using a 256 × 256 × 256 coordinate system is another choice. By either method, the cell program, the pattern formation algorithms, and the ECG simulation algorithm remain the same – they are resolution-independent. This is a prominent and beneficial feature of such cellular automata modeling.
Although experimental evidence show that fiber orientation takes a role in arrhythmia generation [46, 47], to implement a highly realistic description of fiber orientation is expensive because of the difficulty in acquiring sufficient validated data . Encoding these data into models is also quite complex, requiring the use of complex mathematical tools such as tensors. In our model, a new approach is proposed for stratifying heart walls. If fibers are simply built with cells of the same layer, they automatically acquire an arc shape (Figure 6d) that can assume various orientations. Comparison of effectiveness between the two methods is currently not available due to the lack of sufficient simulations.
Another issue relates to ECG simulation. Although simulation results of the 3-D model have not been acquired thus far, the simulated ECGs with the 2-D model in different lead locations and under physiological and pathological conditions are impressive and qualitatively agree with recorded ECGs, supporting the validity of the algorithm. Theoretically, the boundary effect of dielectrics is not negligible for field potential computing; yet in practice simplifications are often inevitable. So far we find that our simplified treatment of boundary effect on field potential does not visibly affect ECG simulation. There may be two reasons for this. First, the conductivity of the tissues (not including the heart) in the chest may not be significantly different. Second, the boundaries among different tissues are so irregular that the net boundary effect may be effectively neutralized. On the other hand, we find that to let cardiac cells under different conditions (depolarization, repolarization, resting state, and ischemia) have different conductivity can improve the ECG quality, indicating that the precise description of the source may be more important than the precise description of the dielectric.
Finally, we point out that, as in single cell models where adaptive time steps can greatly improve the running performance, this same strategy can produce the same results in multicellular models built with this cellular automaton . Simulation with the 2-D model shows that an overall speed improvement of 4.5 is reached.
Effective simulation of arrhythmias needs a whole-heart model, differential description of electrical properties of cardiac cells, membrane equation based computation, association between cellular activities and ECG generation, flexible description of pathological conditions, and long running time. To comprehensively address these issues, we develop a method based on cellular automata and parallel computing technologies to build large-scale electrophysiological models with extended cellular automata, and run such models on clusters of shared memory machines. The dynamically traced and captured electrical activities at channel, cell, and organ levels can substantially help us understand abnormal cardioelectrical activities through simulation. Simulation results with the 2-D model support the validity of the ECG simulation algorithm. Transparent cluster computing is a convenient and effective solution to the excessive time consumption of computational intensive simulation.
In addition to reaching a mechanistic understanding of arrhythmias, an important goal of in silico research is to facilitate the discovery and evaluation of drugs. This helps to reduce the risk and cost of clinical trials, shorten the cycle of development, and remove randomness in candidate screening. A whole-heart electrophysiological model that links electrical activities at channel, cell, and organ levels can help achieve this result. The modeling method described in this paper shows the advantages of precisely linking cell and organ activities, exploiting the intrinsic parallelism in tissue/organ level biological activities. Besides modeling electrical activity, the method is also applicable to many other multicellular models in which quantitative description is required.
Albert CM, Chae CU, Grodstein F, Rose LM, Rexrode KM, Ruskin JN, Stampfer MJ, Manson JE: Prospective study of sudden cardiac death among women in the United States. Circulation 2003, 107: 2096–2101. 10.1161/01.CIR.0000065223.21530.11
Fleischmann PH, Stark G, Wach P: The antiarrhythmic effect of verapamil on atrioventricular re-entry in the Wolff-Parkinson-White syndrome: a computer model study. Int J Biomed Comput 1996, 41: 125–136.
Throne RD, Olson LG, Windle JR: A new method for incorporating weighted temporal and spatial smoothing in the inverse problem of electrocardiography. IEEE Trans Biomed Eng 2002, 49: 1054–1059. 10.1109/TBME.2002.802058
Gulrajani RM, Savard P, Roberge FA: The inverse problem in electrocardiography: solutions in terms of equivalent sources. Crit Rev Biomed Eng 1988, 16: 171–214.
Shahidi AV, Savard P: Forward problem of electrocardiography: construction of human torso models and field calculations using finite element method. Med Biol Eng Comput 1994, 32: S25-S33.
Thakor NV, Ferrero JM Jr, Saiz J, Gramatikov BI, Ferrero JM Sr: Electrophysiologic models of heart cells and cell networks. IEEE Eng Med Biol Mag 1998, 17: 73–83. 10.1109/51.715490
Bardou AL, Auger PM, Birkui PJ, Chasse JL: Modeling of cardiac electrophysiological mechanisms: from action potential genesis to its propagation in myocardium. Crit Rev Biomed Eng 1996, 24: 141–221.
Splawski I, Timothy KW, Tateyama M, Clancy CE, Malhotra A, Beggs AH, Cappuccio FP, Sagnella GA, Kass RS, Keating MT: Variant of SCN5A sodium channel implicated in risk of cardiac arrhythmia. Science 2002, 297: 1333–1336. 10.1126/science.1073569
Saxberg BE, Cohen RJ: Cellular automata models for reentrant arrhythmias. J of Electrocardiogy 1990,23(Suppl):95–95. 10.1016/0022-0736(90)90082-D
Siregar P, Sinteff JP, Chahine M, Le beux P: A Cellular automata model of the heart and its coupling with a qualitative model. Comput Biomed Res 1996, 29: 222–246. 10.1006/cbmr.1996.0017
Barbosa CRH: Simulation of a plane wavefront propagating in cardiac tissue using a cellular automata model. Phys Med Biol 2003, 48: 4151–4164. 10.1088/0031-9155/48/24/012
Porras D, Rogers JM, Smith WM, Pollard AE: Distributed computing for membrane-based modeling of action potential propagation. IEEE Trans Biomed Eng 2000, 47: 1051–1057. 10.1109/10.855932
Vigmond EJ, Hughes M, Plank G, Leon LJ: Computational tools for modeling electrical activity in cardiac tissue. J Electrocardiol 2003,36(Suppl):69–74. 10.1016/j.jelectrocard.2003.09.017
Snir M, Gropp W: MPI: The Complete Reference MIT Press 1998.
Chandra R, Dagum L, Kohr D, Maydan D: Parallel Programming in OpenMP Morgan Kaufmann Publishers 2001.
Hooks DA, Tomlinson KA, Marsden SG, LeGrice IJ, Smaill BH, Pullan AJ, Hunter PJ: Cardiac microstructure: implications for electrical propagation and defibrillation in the heart. Circ Res 2002, 91: 331–338. 10.1161/01.RES.0000031957.70034.89
Ackerman MJ: The Visible Human Project: a resource for anatomical visualization. Medinfo 1998, 9: 1030–1032.
Wolfram S: Cellular automata as models of complexity. Nature 1984, 311: 419–424.
Wolfram S: A New Kind of Science Wolframe Media, Inc 2002.
Gutowitz H: Cellular automata: theory and experiment. Physica D 1990., 45:
Ermentrout GB, Edelstein-Keshet L: Cellular automata approach to biological modeling. J Theor Biol 1993, 160: 97–133. 10.1006/jtbi.1993.1007
Griffeath D, Moore C: New Constructions in Cellular Automata (Edited by: Griffeath D, Moore C). Oxford University Press 2003.
Eckart JD: Cellang 2.0: language reference manual. SIGPLAN Notices 1992,27(8):107–112.
Nijhout HF, Nadel L, Stein D: Pattern Formation in the Physical and Biological Sciences Addison Wesley Longman 1997.
Antzelevitch C, Sicouri S, Litovsky SH, Lukas A, Krishnan SC, Di Diego JM, Gintant GA, Liu DW: Heterogeneity within the ventricular wall: electrophysiology and pharmacology of epicardial, endocardial, and M cells. Circ Res 1991, 69: 1427–1449.
Durrer D, van Dam RT, Freud GE, Janse MJ, Meijler FL, Arzbaecher RC: Total excitation of the isolated human heart. Circulation 1970, 41: 899–912.
Yanagihara K, Noma A, Irisawa H: Reconstruction of sino-atrial node pacemaker potential based on the voltage clamp experiments. Japan J of Physiol 1980, 30: 841–857.
Liu Y, Zeng W, Delmar M, Jalife J: Ionic mechanisms of electronic inhibition and concealed conduction in rabbit atrioventricular nodal myocytes. Circulation 1993, 88: 1634–1646.
Nygren A, Fiset C, Firek L, Clark JW, Lindblad DS, Clark RB, Giles WR: Mathematical model of an adult human atrial cell: the role of K+ currents in repolarization. Circ Res 1998, 82: 63–81.
Luo CH, Rudy Y: A model of the ventricular cardiac action potential, depolarization, repolarization, and their interaction. Circ Res 1991, 68: 1501–1526.
McAllister RE, Noble D, Tsien RW: Reconstruction of the electrical activity of cardiac Purkinje fibres. J Physiol 1975, 251: 1–59.
Rush S, Larson H: A practical algorithm for solving dynamic membrane equations. IEEE Trans Biomed Eng 1978, 25: 389–392.
Henriquez AP, Vogel R, Muller-Borer BJ, Henriquez CS, Weingart R, Cascio WE: Influence of dynamic gap junction resistance on impulse propagation in ventricular myocardium: a computer simulation study. Biophys J 2001, 81: 2112–2121.
Vogel R, Weingart R: Mathematical model of vertebrate gap junctions derived from electrical measurements on homotypic and heterotypic channels. J Physiol 1998, 510: 177–189.
Pressler ML, Munster PN, Huang X: Gap junction distribution in the heart: functional relevance. Cardiac Electrophysiology: From Cell to Bedside Second Edition W.B Saunders Company 1995.
Whalley DW, Wendt DJ, Grant AO: Electrophysiologic effects of acute ischemia and reperfusion and their role in the genesis of cardiac arrhythmia. Arrhythmia: Mechanisms, Diagnosis, and Management Wiliams & Wilkins Publisher 1995.
Shaw RM, Rudy Y: Electrophysiologic effects of acute myocardial ischemia: a mechanistic investigation of action potential conduction and conduction failure. Circ Res 1997, 80: 124–138.
MacFarlane PW, Veitch Lawrie TD: Comprehensive Electrocardiology (Edited by: Macfarlane PW, Lawrie TDV). Pergamon Press 1989.
Tinniswood AD, Furse CM, Gandhi OP: Power deposition in the head and neck of an anatomically based human body model for plane wave exposures. Phys Med Biol 1998, 43: 2361–2378. 10.1088/0031-9155/43/8/026
Plonsey R: Bioelectric Phenomena McGraw-Hill Book Company 1969.
Czapski P, Ramon C, Huntsman LL, Bardy GH, Kim Y: On the contribution of volume currents to the total magnetic field resulting from the heart excitation process: a simulation study. IEEE Trans Biomed Eng 1996, 43: 95–104. 10.1109/10.477705
Luo CH, Rudy Y: A dynamic model of the cardiac ventricular action potential I. simulation of ionic currents and concentration changes. Circ Res 1994, 74: 1071–1096.
Pollard AE, Burgess MJ, Spitzer KW: Computer simulations of three-dimensional propagation in ventricular myocardium: effects of intramural fiber rotation and inhomogeneous conductivity on epicardial activation. Circ Res 1993, 72: 744–756.
Ebihara L, Johnson EA: Fast sodium current in cardiac muscle: a quantitative description. Biophys J 1980, 32: 779–790.
Huiskamp G: Simulation of depolarization in a membrane-equations-based model of the anisotropic ventricle. IEEE Trans Biomed Eng 1998, 45: 847–855. 10.1109/10.686792
Rogers JM, McCulloch AD: Nonuniform muscle fiber orientation causes spiral wave drift in a finite element model of cardiac action potential propagation. J Cardiovasc Electrophysiol 1994, 5: 496–509.
Chen PS, Cha YM, Peters BB, Chen LS: Effects of myocardial fiber orientation on the electrical induction of ventricular fibrillation. Am J Physiol 1993, 264: H1760-H1773.
Scollan DF, Holmes A, Zhang J, Winslow RL: Reconstruction of cardiac ventricular geometry and fiber orientation using magnetic resonance imaging. Ann Biomed Eng 2000, 28: 934–944. 10.1114/1.1312188
Zhu H, Pang PYH, Sun Y, Dhar P: Asynchronous adaptive time step in quantitative cellular automata modeling. BMC Bioinformatics 2004, 5: 85. 10.1186/1471-2105-5-85
Sachse FB, Seemann G, Werner CD: Modeling of force development in the human heart with a cellular automaton parameterized by numerical experiments. In Proc 2nd Joint Conference of the IEEE EMBS and BMES 2002, 1226–1227.
The authors wish to extend their sincere appreciation to our funding agency, Agency of Science, Technology and Research (A-STAR), Singapore for supporting the present work.
HZ develops the methods and built the initial 3-D model. AM provides data of conduction system distribution in ventricles. YS and GR help solve some technical issues. PD is responsible for the project.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
About this article
Cite this article
Zhu, H., Sun, Y., Rajagopal, G. et al. Facilitating arrhythmia simulation: the method of quantitative cellular automata modeling and parallel running. BioMed Eng OnLine 3, 29 (2004). https://0-doi-org.brum.beds.ac.uk/10.1186/1475-925X-3-29
- Cellular Automaton
- Action Potential Duration
- Field Point
- Cell Program
- Cardiac Model