- Open Access
Automated drusen detection in retinal images using analytical modelling algorithms
BioMedical Engineering OnLine volume 10, Article number: 59 (2011)
Drusen are common features in the ageing macula associated with exudative Age-Related Macular Degeneration (ARMD). They are visible in retinal images and their quantitative analysis is important in the follow up of the ARMD. However, their evaluation is fastidious and difficult to reproduce when performed manually.
This article proposes a methodology for Automatic Drusen Deposits Detection and quantification in Retinal Images (AD3RI) by using digital image processing techniques. It includes an image pre-processing method to correct the uneven illumination and to normalize the intensity contrast with smoothing splines. The drusen detection uses a gradient based segmentation algorithm that isolates drusen and provides basic drusen characterization to the modelling stage. The detected drusen are then fitted by Modified Gaussian functions, producing a model of the image that is used to evaluate the affected area.
Twenty two images were graded by eight experts, with the aid of a custom made software and compared with AD3RI. This comparison was based both on the total area and on the pixel-to-pixel analysis. The coefficient of variation, the intraclass correlation coefficient, the sensitivity, the specificity and the kappa coefficient were calculated.
The ground truth used in this study was the experts' average grading. In order to evaluate the proposed methodology three indicators were defined: AD3RI compared to the ground truth (A2G); each expert compared to the other experts (E2E) and a standard Global Threshold method compared to the ground truth (T2G).
The results obtained for the three indicators, A2G, E2E and T2G, were: coefficient of variation 28.8 %, 22.5 % and 41.1 %, intraclass correlation coefficient 0.92, 0.88 and 0.67, sensitivity 0.68, 0.67 and 0.74, specificity 0.96, 0.97 and 0.94, and kappa coefficient 0.58, 0.60 and 0.49, respectively.
The gradings produced by AD3RI obtained an agreement with the ground truth similar to the experts (with a higher reproducibility) and significantly better than the Threshold Method. Despite the higher sensitivity of the Threshold method, explained by its over segmentation bias, it has lower specificity and lower kappa coefficient. Therefore, it can be concluded that AD3RI accurately quantifies drusen, using a reproducible method with benefits for ARMD evaluation and follow-up.
Drusen are considered as one of the Age-Related Macular Degeneration (ARMD) main risk factors . These are retinal abnormalities, caused by the accumulation of extra-cellular materials beneath the retina surface. Despite that, on their own, they usually don't cause vision loss, although they can contribute to the development of ARMD. They are visible in retinal images as yellow round deposits that can be located anywhere in the retina (Figure 1). However, their consequences are more severe when located in the macula. The diagnosis and the follow up of drusen are commonly done through an evaluation of the affected area in fundus images. This evaluation, in a sequence of images taken during a long term treatment, helps to understand the progression of the disease and the effectiveness of the treatment. Nevertheless, this evaluation is fastidious and difficult to reproduce when performed manually. Therefore, the automation with digital image processing techniques, will enable the establishment of a stable criterion which in turn will certainly improve the follow up of this disease.
The automatic analysis of retinal images can be influenced by several factors. Misalignment between patient eye and camera, contracted pupil or cataracts can produce images with non-uniform illumination patterns, making retina analysis more difficult. The correction of the image contrast is an important step to improve the automatic processing of the retinal images. Histogram equalization and specification have been used to normalize retinal images contrast [2–4]. However, they are not able to correct localized non-uniformities. Smith et al.  presented a method to correct the contrast on the macular region, which obtained a good normalization, but required user intervention to specify the macula location and did not correct other illumination distortions.
Several studies for drusen segmentation have been published in the last twenty-years. Local thresholds [6–11], global thresholds  or fuzzy logic thresholds  were some of the proposed solutions for drusen segmentation. However, threshold techniques are significantly tampered by noise, requiring a good noise removal method.
In this work we propose a novel methodology for automated drusen detection and quantification that includes:
The retinal images which were used to validate the proposed methodology were collected from two collaborating research centres. Twenty two film images were selected, digitalized and saved as bitmap with 1000 × 1000 24-bit colour pixels. Eight experts (four ophthalmologists and four trained technicians) marked digitally the existing drusen using the application, Manual Drusen Deposits Detection in Retinal Images (MD3RI) that was specifically developed for this purpose  and made available on the internet . This application allows computer assisted drawing of drusen contours, saving time and effort to the users and obtaining a very precise manual detection. In this study, the Wisconsin Grading System recommendations  were adopted. Following these recommendations, the inner-macula was defined as the region of interest (circular region of 3000 μm diameter around the Macula).
The proposed methodology defines all image processing steps to determine the area affected by drusen in order to establish a uniform analysis criterion. In the first processing step, the effects of non-uniform illumination are reduced and the contrast is normalized. The second processing step is the drusen detection, followed by the drusen modelling that detects and characterizes the drusen spots. On the fourth and last step, the affected area is quantified using the drusen model. The application Automatic Drusen Deposits Detection in Retinal Images (AD3RI) was developed for the validation of this methodology.
Similarly to several other works [8, 11, 19] only the green channel was selected for all the image processing. This channel usually offers a better drusen visibility by presenting a better contrast and less sensitivity to illumination abnormalities (when compared to the red and blue channels).
Non-uniform illumination correction
In ophthalmic imaging, retina pigmentation, patient's eye alignment, cataracts and optical characteristics of the fundus camera are some of the factors that can contribute to the non-uniform illumination of the acquired images (Figures 2.a1 and 2.a2)). Our proposal to solve this problem is to divide the original image by an estimation of the illumination pattern.
The estimation of the illumination pattern is obtained from the fitting of a cubic smoothing Spline  to the image f(x,y) (Figures 2.b1 and 2.b2)). The chosen cubic smoothing spline is a special class of Spline that can capture the low frequencies that characterize the non-uniformity of the illumination. The fitting objective is to minimize the equation (1).
This equation contains two terms: the summation term (weighed by the smoothing factor p) that measures how close the spline is to the data, and the integral term (weighed by (1 - p)) that measures the spline smoothness using its second derivative.
The smoothing factor p, controls the balance between being an interpolating spline crossing all data points (with p = 1) and being a strictly smooth Spline (with p = 0). A too high p value will tend to produce, after the normalization, a flatter image, flattening also the drusen spots, which is a clearly unwanted side-effect. A too low p value will maintain drusen spots, but will not correct the illumination's non-uniformity.
The p value is also dependent on the image resolution and as resolution increases, it must also increase in order to maintain equivalent smoothness. A reference smoothing factor (p = 1e-6) was obtained empirically for a image resolution of 12.5 μ m/pixel. To find the relation between the smoothing factor and the image resolution, test images were resized to a predefined scale and p values were estimated to produce equivalent smoothing effects. The analysis of the smoothing factors showed a polynomial distribution as presented in equation (2) (take x as image resolution).
In this fitting process, the large drusen areas influence negatively the illumination estimation, by being frequently evaluated as illumination. To overcome this, an iterative estimation process which masks drusen areas was implemented. It is based on the method proposed by Smith et al. , applied to the whole region of interest using two clusters.
The iterative estimation process is algorithmically described in Figure 3. It is composed by the following steps that were repeated a predefined number of times:
estimation of the illumination pattern (1);
division of the original image by the estimated illumination pattern (2);
binarization of the image (using Otsu thresholding) to cluster the pixels into two classes: drusen and background (3); and
replacement of the pixels belonging to the drusen class by the estimated spline in the original image, creating an image without drusen's brighter areas (4).
This process is repeated 5 times (obtained empirically) progressively reducing the influence of higher intensity pixels on the next iteration. As result of this iterative process a corrected image with uniform illumination and without lost of contrast between the background and the drusen areas is obtained (Figure 2.c1 and 2.c2)).
Image contrast normalization
Depending on the original image contrast the non-uniform illumination correction can generate saturated or low contrasted images. This problem was corrected with the introduction of a contrast normalization procedure, achieved by normalizing the Root Mean Square contrast (RMSc)  to a predefined value. The RMS contrast calculation was based in the calculus of the contrast between retinal vessels and the background that was adopted as a reference contrast value. This calculus is applicable to any retinal image, as retinal vessels are always present.
For the vessels contrast calculation, we used a squared sliding window that locally evaluates RMSc contrast and mean intensity. The window was dimensioned to 250 μm wide (twice the diameter of a main vessel), in order to contain a single vessel surrounded by background. After moving the sliding window over all the image, the 51 darker windows, typically containing main vessels over a uniform background, are selected. The overall image RMSc - RMSc_overall - is calculated as the median of the 51 windows local RMSc (Figure 4). As the automatic algorithm can fail in some particular situations (images defects or other retinal irregularities), the window corresponding to the RMSc_overall value might be manually relocated by the user.
Image intensity is updated using the equation (3), with RMSc_reference = 15 and the constant background value A = 85. Such predefined values were obtained empirically, in order to keep 2/3 of the grey scale for representing the bright areas.
Drusen detection and quantification are based on the modelling of drusen to ensure shape consistency in image segmentation. The first step of the detection algorithm is to determine drusen amplitudes and locations. Considering that drusen are regional intensity maxima and that, in a gradient image, they have in its direction a confluence of several ascending paths (Figures 5.a and 5.b), the algorithm proposed for drusen detection is a novel segmentation method based on the labelling of these gradient paths (Figure 6).
The first stage of this labelling procedure is a pixel level analysis, following a top-left to bottom-right direction. It starts assigning a new label to each pixel and determining its gradient azimuth using a 3 × 3 Sobel operator (Figure 5.b), which is the direction to an ascending intensity. The following step, label propagation, propagates this label following the gradient path until an already marked or outside image boundaries pixel is found (Figures 5.c and 5.d). When the propagation process finishes on a different label, the two labels are tagged as equivalents, i.e., they are considered to belong to the same maximum (for example labels 2, 4, 6, 10 in Figures 5.d and 5.e).
The second stage of the labelling procedure is to apply the equivalences. Equivalent labels are grouped and replaced on the image by the smaller one of each group (Figure 5.f) producing a segmented image with as many labels as drusen spots.
When flat valleys or flat hills exist, not all gradient paths end on the same maximum pixel, resulting in an over-segmentation of the image. To solve this problem, a merging algorithm was introduced as the last stage of the labelling procedure.
Analysing the labelled and the original image, the merging algorithm begins by creating a graph where nodes correspond to labels and links represent the adjacencies between them (Figure 7). Each node is characterized by the maximum intensity level of the pixels in its region and each link is set with the minimum intensity value of the border pixels between the two adjacent regions. If the difference between the link and the nodes is below a predefined threshold (Δ a ), the two corresponding regions are merged. The value of Δ a adjusts the detail of the analysis (Δ a = 3 was empirically found to be adequate for our normalized images).
After the merging, drusen are segmented and characterized by the coordinates and amplitude of their maximum intensity, which are the initial parameters for the modelling algorithm.
In order to quantify drusen spots it is necessary to analytical characterize their shape and intensity. The intensity elevations shown on drusen areas on the tri-dimensional representation (Figure 8.a) motivated the creation of a model of the image intensity. From this model the drusen dimensions and the total affected area are extracted.
In a typical three-dimensional view of a druse (Figure 8.a), it can be seen that it has a shape similar to a Gaussian function (Figure 8.b). Based on this observation, the Modified Gaussian function (equation (4)) was adopted to individually model the drusen spots. This function allows translations in the xyz axes (x 0, y 0, z 0 ), amplitude scaling (A), rotation (θ) and shape adjustments (σ x , s F , d). These latter define the width in the x-plane (σ x ); width in y-plane (s F ); and the amplitude profile between square shape, bell shape and thin shape (d ).
The Levenberg-Marquardt Least-Squares optimization algorithm  was used to fit the multiple elementary functions to the image (Figure 8.c) adjusting the functions parameters in order to minimize the mean square error between the model and the image. The algorithm was improved by including interval constraints in the amplitude and shape factor parameters, in order to guarantee the convergence of the solution and reduce computation time.
The modelling of the image by multiple functions, each containing eight adjustable parameters, is time consuming and can be non-convergent. To reduce complexity and improve convergence, an image sectioning method was implemented. Its goal was to create smaller images containing isolated or confluent drusen to be processed individually.
The sectioning process begins by applying a threshold to the normalized image (10% above the normalized background). The result is an image where drusen (isolated or confluent) are roughly identified and surrounded by background. The process is followed by a connected components object detection algorithm  to identify and label the drusen areas. Finally, these marked areas are copied from the original image to new smaller images containing just the identified drusen surrounded by background. These small images are then individually analysed by the modelling algorithm, requiring lower complexity.
Drusen Area Quantification
The contour of drusen spots and their area are calculated by thresholding the analytical model. The threshold value, that produces more accurate contours, was determined by comparing the false-positives and the false-negative pixels between the automated method and all the manually graded images. The threshold value is defined as a percentage of the background value used for the image normalization.
The threshold value was found by comparing the statistics for different threshold values (between 0% and 50%) by plotting their Receiver Operating Characteristic curve (ROC) and Cohen's kappa Coefficient Curve (Figure 9). The curves show maximum accuracy at a threshold of 18% with a kappa coefficient of 0.51, a sensitivity of 0.63 and a specificity of 0.96. The 18% threshold was therefore adopted as the quantification threshold.
To validate and assess the accuracy of the automated method (AD3RI) it was compared to the gradings done by the experts and to a classical Global Threshold method. The Global Threshold method was applied to the normalized images and used an empirically found threshold value of 30% of the background value used for the image normalization.
For evaluation purposes it was assumed that a good performance of the AD3RI would be to obtain an overall score similar to the obtained by the experts. Experts were also evaluated among themselves, in order to produce an efficiency score for each of them.
AD3RI, Experts and Threshold gradings were assessed using both overall and local agreement indicators. Based on the total affected area, two overall indicators were used: the Coefficient of Variation (CV) and the Intraclass Correlation Coefficient (ICC). Local indicators sensitivity, specificity and kappa coefficient were based on a pixel-to-pixel analysis that determines false-positive and false-negative pixels.
Results and discussion
The validation of the methodology was made with the dataset of twenty two retinal images. A first examination of the total affected areas, as presented in Table 1, showed a significant variability within the experts' gradings (43% average). There was a poor agreement among them especially on some low contrast images, creating an issue for image comparison purposes. User's subjectivity and different contrast and illumination settings were the main causes for the different analysis criteria. To illustrate these differences, Figure 10 presents three images processed by the AD3RI side-by-side with the experts' gradings. It can be seen that, on the right image, which was the one with highest variability, there was almost no agreement on drusen sizes and locations. As a result of this variability, an outlier identification policy was implemented. Therefore, the images which had a CV among the experts above 50% (#8, #10, #11, #18 and #22) were considered outliers and excluded from the study.
Table 2 presents the summary of results obtained by the AD3RI, the Global Threshold method and each expert, excluding the outlier images. Areas' comparison (CV and ICC) showed that, although the CV obtained by the AD3RI (28.8%) was above the average among the experts (22.5%), the ICC (0.92) revealed a strong correlation between AD3RI and the experts. The images containing few drusen spots were the main cause for a higher CV. In these images, the total affected area is low and an over or under estimation of drusen spots will cause a significant relative variation on the total area, increasing its CV. The Threshold method showed a low agreement, obtaining a high CV (41.1%) and a low correlation (ICC = 0.67).
When examining the accuracy on a pixel-to-pixel comparison, the AD3RI achieved an average sensitivity of 0.68 and an average specificity of 0.96, while the experts obtained 0.67 and 0.97. The slightly lower specificity obtained by the AD3RI was mainly due to the higher detection of drusen as consequence of a more detailed and systematic analysis. The kappa coefficient, analyzed accordingly to Landis and Koch guidelines , showed a moderate agreement for both AD3RI (k = 0.58) and experts average (k = 0.60).
The Threshold method showed a sensitivity of 0.74, higher than the average obtained by the experts as consequence of an over-detection of drusen. However this over-detection penalizes significantly its specificity (0.94) and its kappa coefficient (0.49).
From this statistical analysis it was concluded that the proposed algorithm follows the same criteria as the experts, although with a better accuracy and reproducibility.
The Global Threshold method showed a low agreement with the experts. Comparing Thresholding with AD3RI gradings, it can be observed that AD3RI, although with less detailed contours, has lower illumination dependency and provides more consistent drusen shape segmentation with higher reproducibility. The Threshold method is a simpler method, but shows an important tendency for drusen over-detection, producing a higher number of false-positives.
The analysis of the related work shows a large number of different methods and indicators for performance evaluation, limiting the comparison with our method. In the work of Rapantzikos et al.  their algorithm was tested in a set of twenty three images and compared to two experts analyses. For the specificity and sensitivity analysis the interception between the experts' gradings was used. This methodology decreased the probability of false-negatives, consequently rising sensitivity. These two indicators exceeded 0.96 in all cases, which can be considered excellent. However, it should be noted that the experts' interception is not a reliable method, since it eliminates variability, increasing sensitivity without compromising specificity. Smith et al.  evaluated their work with a dataset of twenty images examined by one expert, obtaining a sensitivity of 0.7 and a specificity of 0.8. Therefore, we can consider AD3RI more accurate namely because it was tested against a set of eight experts in order to achieve a more reliable ground-truth.
The development of methods to quantitatively measure drusen in a reproducible and accurate procedure will certainly improve the quality of the follow up of this disease and potentiate epidemiologic studies and clinical trials. These studies, that collect thousands of images throughout several years, must be graded using a reproducible method to allow comparison during all the study period. Currently, this is manually done by trained experts with a fastidious process, lacking accuracy and reproducibility.
This article presents a new method to quantitatively measure drusen and its' validation with 22 images graded by eight independent experts. The algorithm is based on the detection and modelling of drusen to automatically calculate the affected areas. It includes also an image pre-processing step to correct the non-uniform illumination commonly found on this type of images.
The illumination compensation algorithm is an important step to obtain a less parameterized methodology, since it is capable to create an image with normalized illumination and contrast to be used in all the remaining steps. The detection and modelling of drusen with Modified Gaussian functions demonstrated its capability to segment drusen keeping their typical shape, even on low contrast images.
It also provides an analytical model that allows the determination of drusen indicators such as number of spots, affected areas, confluence and average size.
Since there is no standard assessment technique to be applied in this type of studies, most of the published works use different performance indicators what makes comparison between studies inaccurate or even impossible. In our work, performance was assessed using several indicators allowing direct comparison with other studies. This comparison showed that the results produced by the AD3RI were similar or better than the others.
From the above, we considered that AD3RI demonstrated promising results. It compares positively with the panel of human experts and since is a determinist method; it is not dependent on factors such as attention or accuracy.
Hageman GS, Luthert PJ, Victor Chong NH, Johnson LV, Anderson DH, Mullins RF: An integrated hypothesis that considers drusen as biomarkers of immune-mediated processes at the RPE-Bruch's membrane interface in aging and age-related macular degeneration. Prog Retin Eye Res 2001, 20: 705–732. 10.1016/S1350-9462(01)00010-6
Goatman KA, Whitwam AD, Manivannan A, Olson JA, Sharp PF: Colour normalisation of retinal images. Proceedings of Medical Image Understanding and Analysis; Sheffield 2003, 49–52.
Salem NM, Nandi AK: Enhancement of Colour Fundus Images using Histogram Matching. In Proceedings of BioMED2005 - IASTED International Conference on Biomedical Engineering; February 16 - 18, 2005 Innsbruck, Austria Edited by: Adlassnig K-P, Bracale M. 2005.
Gonzalez R, Woods R: Digital Image Processing. third edition. Prentice-Wall; 2007.
Smith RT, Chan JK, Nagasaki T, Ahmad UF, Barbazetto I, Sparrow J, Figueroa M, Merriam J: Automated detection of macular drusen using geometric background leveling and threshold selection. Arch Ophthalmol 2005, 123: 200–206. 10.1001/archopht.123.2.200
Peli E, Lahav M: Drusen Measurement from Fundus Photographs Using Computer Image Analysis. Ophtalmology 1986, 93: 1575–1580.
Kirkpatrick JNP, Spencer T, Manivannan A, Sharp PF, Forrester JV: Quantitative image analysis of macular drusen from fundus photographs and scanning laser ophthalmoscope images. Eye (Royal College of Ophthalmologists) 1995, 9: 48–55.
Rapantzikos K, Zervakis M, Balas K: Detection and segmentation of drusen deposits on human retina: potential in the diagnosis of age-related macular degeneration. Med Image Anal 2003, 7: 95–108. 10.1016/S1361-8415(02)00093-2
Morgan WH, Cooper RL, Constable IJ, Eikelboom RH: Automated extraction and quantification of macular drusen from fundal photographs. Australian and New Zealand Journal of Ophthalmology 1994, 22: 7–12. 10.1111/j.1442-9071.1994.tb01688.x
Phillips RP, Spencer T, Ross PG, Sharp PF, Forrester JV: Quantification of diabetic maculopathy by digital imaging of the fundus. Eye 1991, 5(Pt 1):130–137.
Shin D, Javornik N, Berger J: Computer-assisted, interactive fundus image processing for macular drusen quantitation. Ophthalmology 1999, 106: 1119–1125. 10.1016/S0161-6420(99)90257-9
Smith RT, Nagasaki T, Sparrow JR, Barbazetto I, Klaver CC, Chan JK: A method of drusen measurement based on the geometry of fundus reflectance. Biomed Eng Online 2003, 2: 10. 10.1186/1475-925X-2-10
Thdibaoui A, Rajn A, Bunel P: A fuzzy logic approach to drusen detection in retinal angiographic images. Proceedings of 15th International Conference on Pattern Recognition; Barcelona, Spain 2000, 748–751.
Mora A, Fonseca J, Vieira P: Drusen Deposits Modelling with Illumination Correction. In Proceedings of BioMED2005 - IASTED International Conference on Biomedical Engineering; February 16 - 18, 2005 Innsbruck, Austria Edited by: Adlassnig K-P, Bracale M. 2005.
Mora A, Vieira P, Fonseca J: Modeling of Drusen Deposits Based on Retina Image Tridimensional Information. In Proceedings of Second International Conference on Computacional Intelligence in Medicine and Healthcare - CIMED-2005. Costa da Caparica, Portugal; 2005.
Mora A, Vieira P, Fonseca J: MD3RI a Tool for Computer-Aided Drusens Contour Drawing. In Proceedings of Fourth IASTED International Conference on Biomedical Engineering - BIOMED2006; 15–17 February; Innsbruck, Austria. ACTA Press; 2006.
MD3RI - Manual Drusen Deposits Detection on Retina Images [http://www.ca3-uninova.org/project_drusas]
Klein R, Davis MD, Magli YL, Segal P, Klein BE, Hubbard L: The Wisconsin age-related maculopathy grading system. Ophthalmology 1991, 98: 1128–1134.
Soliz P, Wilson MP, Nemeth SC, Nguyen P: Computer-aided methods for quantitative assessment of longitudinal changes in retinal images presenting with maculopathy. Proceedings of Medical Imaging 2002: Visualization, Image-Guided Procedures, and Display; San Diego, CA, USA SPIE 2002, 159–170.
Culpin D: Calculation of cubic smoothing splines for equally spaced data. Numerische Mathematik 1986, 48: 627–638. 10.1007/BF01399686
Smith RT, Chan JK, Nagasaki T, Sparrow JR, Barbazetto I: A method of drusen measurement based on reconstruction of fundus background reflectance. Br J Ophthalmol 2005, 89: 87–91. 10.1136/bjo.2004.042937
Peli E: Contrast in complex images. Journal of the Optical Society of America A 1990, 7: 2032–2040. 10.1364/JOSAA.7.002032
Marquardt DW: An algorithm for least-squares estimation of non-linear parameters. Journal of the Society for Industrial and Applied Mathematics 1963, 11: 431–441. 10.1137/0111030
Landis J, Koch G: The measurement of observer agreement for categorical data. Biometrics 1977, 159–174.
This work was partially financed by the Fundação para a Ciência e Tecnologia, through the POCTI and POSI Research Programs (project n° POCI/SAU-ESP/57592/2004).
The authors acknowledge the University of Aberdeen, Rudolfstiftung Hospital, Hospital Santa Maria and Universidade Nova de Lisboa for supplying the retinal images used in this work and for their valuable feedback while testing the software and grading the retinal images.
The authors declare that they have no competing interests.
ADM carried out the study design, the statistical analysis and drafted the manuscript. PMV, JMF and AM supervised the study design, helped in the results analysis and reviewed the manuscript.
All authors read and approved the final manuscript.
André D Mora, Pedro M Vieira, Ayyakkannu Manivannan and José M Fonseca contributed equally to this work.
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
About this article
Cite this article
Mora, A.D., Vieira, P.M., Manivannan, A. et al. Automated drusen detection in retinal images using analytical modelling algorithms. BioMed Eng OnLine 10, 59 (2011). https://0-doi-org.brum.beds.ac.uk/10.1186/1475-925X-10-59
- Kappa Coefficient
- Retinal Image
- Digital Image Processing Technique
- Illumination Pattern
- Gradient Path